Fill Dirt delivery in Waverly, TN

Expect fill-dirt prices in Waverly to commonly range from about $8 to $20 per ton ($10 to $26 per cubic yard) depending on screening, local availability, and seasonal demand. Prices tend to rise in spring and fall when landscaping contractors are busiest and after heavy storms or floods that increase local need.

Both screened (cleaner, finer) and bank-run (mixed with rocks and clay) fill-dirt are available in West Tennessee, but screened material is less common and usually costs more. Typical minimum orders are around 3 tons (our minimum); delivery fees often depend on distance and access but many local suppliers offer free delivery within certain radii while rural deliveries or tight access can add a fee.

Waverly’s humid subtropical climate and West Tennessee soils (often clay and silt) make drainage a key concern: fill-dirt with high clay content can hold water, settle, and become muddy after heavy rains. Use well-graded fill-dirt and plan for drainage (swales, pipes, or stone beneath the surface) to prevent washout and long-term settling.

As a rule of thumb, a 1-inch layer over 100 sq ft requires about 0.23 cubic yards (roughly 0.34 tons), but compacted fills will lose volume. For typical compaction in West Tennessee expect 10% to 20% compaction loss: a 6-inch lift over a 1,000 sq ft area will need roughly 6 cubic yards loose (about 8 tons) before compaction; always calculate with a 15% overage to be safe.

Yes. After the 2021 floods the county and regional agencies are particularly attentive to floodplain and erosion controls; you should contact Humphreys County planning or the local building department before large fills, and check FEMA flood maps for your parcel. Minor grading often has fewer requirements, but any work in a mapped floodplain or affecting drainage may need permits, erosion control measures, or coordination with county officials.

Aim for layered compaction in 4 to 6-inch lifts using a plate compactor for thin lifts or a vibratory roller for larger volumes, targeting roughly 90% relative compaction for structural fills. For small residential jobs use a heavy plate compactor; for driveway bases or deeper fills hire a contractor with a vibratory roller or small sheepsfoot if soils are very clayey.

Fill-dirt alone is not ideal as a finished driveway surface; it will rut, wash out, and require frequent regrading after heavy rains. Crushed stone and asphalt last much longer and need less frequent maintenance; expect fill-dirt surfaces to require yearly touch-ups in rainy seasons, whereas crushed stone may need regrading every few years and asphalt lasts many years with periodic resealing.

Local buyers often worry about washout after heavy rains, mud tracking into homes, and whether dump trucks can access narrow rural lanes or steep driveways. Address these by planning drainage, asking suppliers about haul access restrictions, and noting delivery details at checkout so drivers can assess tailgate placement and any spreading limitations.

Fill-dirt is usually the least expensive option per ton but offers the poorest surface stability and drainage. Crushed stone costs more but provides better load-bearing and drainage for driveways; topsoil is best for planting but not for structural fills. Choose based on project: use fill-dirt for bulk grade raising, crushed stone for driveway base, and topsoil for gardens.

Standard delivery is commonly 2+ business days; next-day delivery may be available if ordered before noon CST, with an extra fee. Seasonal demand and storm or flood events can slow deliveries and reduce screened material availability, so plan ahead during spring/fall and after heavy regional storms.

Measure the area and calculate loose volume, add 10% to 20% for compaction and waste, and choose screened fill if you need fewer rocks and better finish. Enter your zip code to check local availability, request delivery details at checkout, and contact our team if you need help selecting a material or estimating quantities.