Fill Dirt delivery in Pigeon Forge, TN

Prices vary with supplier, distance, screening (clean vs. mixed), and quantity. In the Pigeon Forge area you can expect delivered fill dirt pricing to typically fall in a wide range; request a quote from Hello Gravel for current local rates and exact delivered price for your zip code. Volume discounts and site access (ability for a tri-axle truck to dump) also affect final cost.

Coverage depends on driveway width and depth. For a 20 ft long by 10 ft wide driveway (200 sq ft), you would need about 1.2 cubic yards at 2 inches depth and about 2.5 cubic yards at 4 inches depth (roughly 1.7 to 3.5 tons using a typical fill-dirt density). A standard tri-axle dump truck carries far more than that, but note Hello Gravel minimums usually start around 3 tons.

One cubic yard is 27 cubic feet. It will cover about 324 sq ft at 1u0022 depth, 162 sq ft at 2u0022, 108 sq ft at 3u0022, and 81 sq ft at 4u0022. Because fill dirt density varies, one ton is roughly 0.7 to 0.8 cubic yards (about 0.71 yd3 using 1.4 tons/yd3), so adjust quantities if you order by ton.

Fill dirt is designed to raise or level grade, not as a final driving surface. For durability in the hilly, rainy conditions around Pigeon Forge, use compacted crushed stone as a base and crushed gravel or stone for the wearing surface; use fill dirt only where you need to build up or grade before placing the structural base.

You can place fill dirt to raise low areas, but it should be compacted and tested for drainage before you put down surface gravel. For a long-lasting driveway in Pigeon Forge, a compacted granular base (crushed stone) is a better substrate under gravel than loose fill dirt, especially where native soils are clayey or soggy.

We recommend a stable, compacted crushed-stone base with an optional geotextile fabric beneath for separation and drainage; sharp sand is not a substitute for a structural base. Hello Gravel can source and deliver aggregates like crushed stone and standard fill dirt through our supplier network; geotextile fabric is usually purchased from landscape suppliers rather than bulk truck delivery, but our team can advise on where to get it locally.

For a durable driveway, plan on about 4 to 6 inches of compacted crushed stone base and 2 to 3 inches of crushed gravel surface. Use fill dirt only where you need to raise grade before installing that base, and make sure any fill is compacted in layers and allows for proper drainage on Pigeon Forge's sloped lots.

At 2 inches (0.1667 ft) a 1,000 sq ft area requires about 6.2 cubic yards of fill dirt. At 4 inches (0.3333 ft) the same area needs about 12.3 cubic yards. In tons that is roughly 8.5 to 17.5 tons depending on material density, so request an exact conversion when you get your Hello Gravel quote.

Delivered prices vary by supplier, screening level (clean vs. mixed), haul distance, and quantity. For a reliable local number, request a quote on Hello Gravel for your Pigeon Forge zip code; we provide transparent delivered pricing and can show per-cubic-yard and per-ton options so you can compare.

Hello Gravel can source several aggregate products but true stabilizing systems (resin-bound or cement-stabilized bases) are specialty products usually supplied and installed by contractors. Fill dirt is not a stabilizer; it’s used to build grade. If you want a hardened driveway, we can help you obtain the correct base materials and connect you with local contractors who install stabilizing systems and advise on lead times and costs.