Gravel delivery in Morrison, TN

Prices vary by material, quantity, and supplier, but common driveway gravels in West Tennessee typically run approximately $30 to $60 per ton delivered; decorative rock can be $80 to $150+ per ton. Hello Gravel has a 3-ton minimum; the fastest way to get an exact delivered price for Morrison is to enter your zip code and request a quote on our site or call our team. Regional availability and special-order items will increase price and lead time.

For a 20-ft driveway assume a common width of 12 ft: at 4 inches depth you need about 3 cubic yards (roughly 4.2 tons); at 6 inches you need about 4.5 cubic yards (about 6.3 tons). For a durable driveway we recommend a 4-6 inch compacted crusher-run base plus a 1-2 inch surface, which often totals 6 to 8 tons for that 20-ft section; material cost delivered might range roughly $210 to $480 depending on product, with installation costs extra and highly variable by contractor. Contact Hello Gravel for an exact delivered price and get local contractor quotes for installation.

Two inches is generally not sufficient for a driveway; it will rut and migrate under vehicle traffic. For a durable gravel driveway in Morrison we recommend a 4 to 6 inch compacted base of crusher-run or Type 4 stone, topped with a 1 to 2 inch surface layer of #57 or pea gravel for a finished surface. Good compaction, proper slope, and drainage are equally important to depth for long-term performance.

Use crusher-run or DOT Type 4 (a crushed stone mix) for the structural base because they compact well and form a stable foundation. For the wearing surface choose #57 crushed stone, pea gravel, or river rock depending on appearance and traction needs; #57 is common for driveways because it locks together and sheds water. For paths, 2 to 3 inches of compacted surface stone over a well-prepared base is usually sufficient.

Products like polymer-modified gravel, resin-bound mixes, and certain stabilized aggregates are designed to bind and reduce migration but they do not become identical to concrete. Crusher-run compacts to a firm base but is not a rigid slab; polymer-stabilized products provide the most cohesive surface. Many local suppliers can deliver stabilized or polymer-modified products to Morrison, but they are often special-order items with higher cost and lead time—ask for availability when you request your Hello Gravel quote.

Assuming typical crushed stone density (about 1.4 tons per cubic yard), 1 ton of gravel covers roughly 230 square feet at 1 inch depth, about 115 square feet at 2 inches, and about 77 square feet at 3 inches. Use these figures to estimate material needs, and add 5 to 10 percent extra for compaction, grading, and waste. For final ordering, use Hello Gravel's material calculator or contact our team to confirm.

Garretson stone (a hard quartzite) and bluestone (a type of sandstone) are quarried primarily outside Tennessee and are not commonly stocked by local suppliers in West Tennessee. Suppliers can often special-order and deliver these stones to Morrison, but expect higher material and trucking costs compared with locally sourced gravel or limestone. If you need Garretson or bluestone, request a special-order quote so Hello Gravel can check local supplier availability and freight estimates.

Routine maintenance is simple: remove loose debris with a broom or leaf blower, control weeds, and use a low-pressure wash to remove dirt or stains; sealing bluestone can help reduce staining and make cleaning easier. Most aggregate suppliers and haulers do not provide ongoing maintenance services, though some local landscapers and contractors in Bedford County offer cleaning, resealing, or resetting services—ask us for local contractor recommendations. If pieces shift or settle, top up with matching material and re-compact to keep the surface even.

Material-only costs for a gravel patio are usually the lowest, often $1 to $4 per square foot for materials, while installation by a contractor (including base prep and compaction) commonly runs $3 to $10 per square foot total. Pavers and flagstone are more expensive: expect roughly $10 to $30 per square foot installed for pavers and $15 to $40+ per square foot for natural flagstone, depending on stone type and labor complexity. Local labor rates and site prep for drainage or grading in Morrison will affect final pricing, so get multiple contractor bids and a delivered material quote from Hello Gravel.

Yes, some properties in and around Morrison may be subject to Bedford County building or driveway permitting, and many HOAs set surface or aesthetic rules that restrict gravel or require specific materials. Drainage, culvert placement, setbacks from the road, and coverage limits are common concerns; check with Bedford County planning and your HOA before ordering. If you are unsure, contact our team and we can help you identify local permitting contacts or recommend that you consult the county office and your HOA documents.