Gravel in Johnson City, TN

Typical delivered prices in the Johnson City area are roughly $30 to $60 per ton depending on the gravel type, distance, and supplier. A full tri-axle load can contain 10-12 cubic yards (roughly 14-17 tons), so total cost will vary accordingly. For an exact price for your address and material choice, get a quote through Hello Gravel and check zip code availability.

For Johnson City driveways we recommend a layered approach: use a compactable base like 3/4u0022-minus crusher run or washed crusher rock for the bottom, then a 3/8u0022 to 3/4u0022 clean stone as a top layer for good drainage and compaction. The local Appalachian geology means materials vary, so ask for crushed stone with fines if you want a durable, well-locking surface. If appearance is the priority, pea gravel is attractive but it does not compact as well for driveways.

Driveway rock in the Johnson City area generally runs about $30 to $60 per ton delivered, with prices higher for decorative or screened materials. Contractor bulk pricing may be lower, while specialty stones and long-haul deliveries push prices up. Use Hello Gravel to compare local supplier quotes for the most accurate rate.

Hello Gravel typically uses tri-axle trucks that hold about 10-12 cubic yards (approx. 14-17 tons). That volume will cover roughly 1,600-1,940 square feet at a 2-inch depth, or about 800-970 square feet at a 4-inch depth, depending on particle size and compaction. If you need a precise layout for your project, use our material calculator or request a quote with your drive length and desired depth.

No, 2 inches is generally too thin for a driveway in our region. For a stable, long-lasting driveway in Johnson City you should aim for 4-6 inches of compacted gravel over a well-prepared base; heavier vehicle traffic may need 6 inches or more. Two inches may be acceptable for a temporary path or decorative topcoat over an existing stable base.

You can place gravel over dirt, but it often leads to rutting and weed growth, especially on East Tennessee clay soils that hold moisture. Best practice is to remove vegetation/topsoil, compact the subgrade, add a base layer of larger crushed stone, and consider geotextile fabric for separation and weed control before adding the top gravel. Proper prep improves drainage and extends the life of the surface.

One ton of typical gravel will cover about 100-120 square feet at a 2-inch depth. At a 4-inch depth one ton covers roughly 50-60 square feet. Exact coverage depends on stone size and how tightly the material is compacted.

For a 20 ft long by 10 ft wide driveway at a 4-inch compacted depth you would need roughly 3 to 4 tons of material. At $30-$60 per ton delivered, material alone is about $90-$240; with delivery and basic spreading expect a total in the neighborhood of $150-$400 depending on material choice and any hauling fees. Use Hello Gravel to get an exact quote for your address and preferred stone type.

A 100 ft long by 10 ft wide driveway at 4 inches deep requires roughly 17-20 tons of gravel. At $30-$60 per ton delivered, material costs are approximately $500-$1,200 before hauling and any installation labor, so a finished driveway typically ranges from roughly $700 to $2,000 depending on depth, stone type, and site prep. Request a custom quote through Hello Gravel to factor in delivery, local supplier rates, and any spreading needs.

A full tri-axle load (about 10-12 cubic yards or ~14-17 tons) is worth roughly $420 to $1,020 at typical Johnson City per-ton rates of $30-$60. Final price depends on the specific gravel type, local supplier pricing, and delivery distance. For exact pricing and to compare suppliers near Johnson City, get a quote on Hello Gravel.