Fill Dirt delivery in Harriman, TN

Fill-dirt is clean, subsoil material used to raise grade, fill holes, and backfill foundations. In Harriman and West Tennessee, it is commonly used to build up low spots or prepare a pad but is not a finished surface for driveways or walkways because it can be dusty and may settle. For driving or final surfaces, add crusher run or crushed stone on top of compacted fill-dirt.

Using a typical bulk density (about 1.4 tons per cubic yard), expect roughly 0.017 tons per sq ft for 4u0022, 0.026 tons per sq ft for 6u0022, and 0.035 tons per sq ft for 8u0022. For quick planning, that is about 17 tons per 1,000 sq ft at 4u0022, 26 tons at 6u0022, and 35 tons at 8u0022. Actual tonnage can vary with moisture and local material density, so use our material calculator or request an estimate for your zip code.

Delivered fill-dirt in the Harriman area commonly falls in a wide range depending on source, distance, and moisture — a typical ballpark is $12 to $28 per ton. Hello Gravel has a 3-ton minimum and works with local suppliers, so your final price will reflect the local supplier, haul distance, and whether delivery is next-day. Check your zip code on our site or get a quote for an exact delivered price.

On Harriman's clay-heavy soils, screened or well-graded bank-run fill that is free of organic material performs best as structural fill. For slopes and areas needing drainage, a mix with coarser particles or a crushed rock mix provides better stability and reduces sliding and erosion compared with pure clay. If erosion or wet conditions are a concern, consider adding a drainage layer or geotextile and topping with angular aggregate for stabilization.

Yes, fill-dirt can be used as subgrade under driveways and pads, but it must be placed in lifts and mechanically compacted. Aim for 90-95% of standard Proctor density with lifts of 6 to 8 inches compacted with a plate compactor, jumping jack, or vibratory roller depending on area size. Keep the material at the right moisture level during compaction and consider a 4-6u0022 layer of crusher run or aggregate base on top for a finished driveway surface.

Hello Gravel partners with local haulers and suppliers around Harriman and throughout West Tennessee; we handle quoting and scheduling so you can order online or by phone. Our site shows availability by zip code, has a material calculator, and enforces our 3-ton minimum per delivery. If you need contractor-grade delivery or spreading, request tailgate spreading in Order Notes and our team will coordinate with the driver, but spreading is at the driver's discretion.

Fill-dirt is usually the least expensive material to raise grade, but it is not a durable wearing surface and will require topping with crusher run or crushed stone for a driveway. Crusher run and crushed stone cost more up front but provide a stable, low-maintenance surface in Harriman's wet climate and clay soils. A common approach is fill with compacted fill-dirt, then install 4-6u0022 of crusher run as the base and 1-2u0022 of crushed stone for the finished surface.

Some settlement is normal, especially in West Tennessee's clay soils and with wet seasons. Proper placement in compacted lifts greatly reduces settlement; small landscaping areas may be ready in days, while deeper fills or structural pad work may require engineered compaction and testing and could take longer to verify. For structural builds, consult a local engineer or contractor to confirm compaction tests and allowable loads before construction.

Confirm truck access, overhead clearance, and where you want material placed before delivery—Harriman yards can be soft after rain and trucks typically use tri-axle dump rigs. Add delivery instructions in Order Notes and expect drivers to assess if tailgate spreading is safe; Hello Gravel schedules deliveries 2+ business days out with a next-day option for orders placed by noon CST. If your site has tight access or special placement needs, contact our team so we can coordinate the right equipment and crew.