Fill Dirt delivery in Blaine, TN

In and around Blaine, delivered fill-dirt commonly runs in the range of about $8 to $25 per ton, depending on driver distance, site access, and supplier stock. Small rural deliveries often push toward the higher end because of longer haul and smaller loads; Hello Gravel’s minimum order is 3 tons and we show exact delivered pricing for your zip code at checkout. Expect additional fees for next-day delivery or difficult access and ask for a delivered quote that includes placement details.

Common alternatives include crusher run (a compactable mix of stone and fines) and bank run gravel (mixed stone and sand), both of which are better for driveways and drainage than plain fill-dirt. Topsoil is not a good substitute for load-bearing surfaces because it contains organic matter and will settle; contractors often build a compacted stone base (crusher run) and top with a wearing course for best durability. Choose material based on intended use: fill-dirt for bulk grading, crusher run for structural bases, and topsoil for planting.

Tennessee soils often have clay components that hold water and become soft when wet, which can cause fill-dirt to settle, rut, or drain poorly if not compacted and drained properly. In Blaine’s climate, provide positive slope, install ditches or subsurface drains where needed, and compact fill in thin lifts to reduce settlement. For driveways, put a compacted rock base under fill-dirt or use geotextile fabric to separate clay from structural layers.

As a rule of thumb, raising one acre by 1 inch requires about 150 to 170 tons of fill-dirt, so 3 inches is roughly 450 to 510 tons and 6 inches is roughly 900 to 1,020 tons. Variations in material density, moisture content, and compaction mean you should allow a 5 to 15 percent contingency. Use Hello Gravel’s calculator or request a site estimate for a more precise number based on local material density.

Local rates vary: expect machine rates of roughly $75 to $175 per hour for equipment (skid steer, small excavator, or loader) plus operator, with labor-only rates often $40 to $90 per hour per worker. Some contractors will price spreading and compacting by the ton at roughly $2 to $8 per ton for larger jobs, depending on accessibility and site prep. Get written quotes that list equipment used, number of passes for compaction, and whether hauling placement is included.

Yes — bringing large volumes of fill can trigger local regulations in Blaine and Grainger County such as grading permits, erosion and sediment control, floodplain or wetlands restrictions, and septic or setback rules. Contact Blaine city hall and the Grainger County Planning/Building office before major imports and ask if a grading permit, erosion control plan, or traffic/driveway permit is required. Hello Gravel recommends checking local rules early so you can include any permitting costs in your project budget.

Homeowners commonly source fill-dirt from nearby gravel pits, landscape supply yards, and local quarries in Grainger and neighboring counties, or from suppliers in the Knoxville area for larger orders. Hello Gravel connects you to local suppliers and shows delivered pricing to Blaine; ordering through our platform often saves time because we coordinate trucks and local inventory. If you need on-site placement, request tailgate spreading at checkout and confirm driver capabilities on delivery day.

Access roads using plain fill-dirt typically need regular maintenance: plan on light regrading or adding fresh material every 1 to 3 years, more often where traffic is heavy or drainage is poor. Maintain ditches, crown the road for runoff, and address low spots promptly to avoid major repairs. For lower maintenance, install a compacted aggregate base (crusher run) over the fill-dirt and establish proper drainage from the start.

Yes — Hello Gravel’s minimum order is 3 tons, and standard delivery trucks are usually tri-axle dump trucks that carry roughly 10 to 14 tons of loose fill-dirt per load. For orders larger than a single truck load we coordinate multiple deliveries and schedule drop times; for small, tight-access jobs ask about smaller trucks or offload options. Include placement notes at checkout so drivers can plan access and avoid extra handling charges.