Gravel delivery in Simpsonville, SC

Prices vary by gravel type and local supply, but in Simpsonville delivered gravel typically runs in the range of about $30 to $70 per cubic yard or roughly $40 to $90 per ton. Finer materials and specialty colors cost more, and exact pricing depends on your zip code and delivery details — get a quote on our site to see current local rates.

Most local tri-axle dump trucks carry about 10 to 12 cubic yards, which equals roughly 13 to 18 tons depending on the gravel density. A full truckload delivered to Simpsonville will commonly cost in the few-hundred to low-thousand dollar range depending on material and hauling distance; request a truckload quote in checkout for an exact price.

Coverage depends on depth: one cubic yard covers about 162 sq ft at 2 inches or about 108 sq ft at 3 inches. So a 10-yard truck would cover roughly 1,620 sq ft at 2 inches or about 1,080 sq ft at 3 inches; adjust calculations for your desired depth.

For a wearing surface, 2 inches is generally too thin for a driveway. We recommend at least 3 to 4 inches of compacted crushed stone over a properly prepared base for light passenger cars, and 6 inches or more for heavy vehicles or poor subgrade — consider local rainfall and drainage in Simpsonville when planning depth.

Buying in bulk, ordering by the ton, and choosing locally sourced materials usually gives the best value in Simpsonville. Compare local supplier quotes through Hello Gravel, consider recycled crushed concrete for lower cost options, and avoid small bag purchases for larger jobs to save on per-ton pricing and delivery fees.

Costs vary by length, depth, and material. For example, a 20 ft wide by 50 ft long driveway at 4 inches deep needs about 4.9 cubic yards (roughly 7 to 8 tons); at a local delivered rate of $40 to $80 per ton, material would cost about $280 to $640 plus delivery and any site prep. Use our calculator or get a local quote for a precise estimate based on your exact dimensions.

Coverage varies with gravel density, but one ton typically covers about 100 to 120 sq ft at a 2-inch depth and about 65 to 90 sq ft at a 3-inch depth. Use these estimates as a starting point and verify with a volume calculation for your specific material.

Pea gravel is not a reliable pest barrier: it may discourage some insects but will not keep rodents away, which can burrow under or nest near edges. For pest control, focus on eliminating food sources, sealing foundation gaps, and using proper edging and compacted base materials rather than relying on pea gravel alone.

Hello Gravel works with local Simpsonville and Greenville County suppliers that carry pea gravel and offer delivery. Enter your zip code on our site to see available pea gravel options, delivery pricing, and scheduling — minimum order is typically 3 tons and many areas have free delivery options.

For delivery and billing, ordering by the ton is often simplest because trucks and suppliers price by weight. For planning and DIY calculations, cubic yards are useful; convert between them with our calculator (ton per cubic yard varies by material and regional sourcing). If you are unsure, order by the ton through Hello Gravel and use our support team to confirm quantities.

Measure the area in square feet, decide the required depth in inches, then calculate volume: (area x depth in feet) / 27 to get cubic yards. Convert cubic yards to tons using the material density estimate given on our product pages, or use Hello Gravel's material calculator to get an immediate tonnage and delivery recommendation.