Fill Dirt delivery in Meggett, SC

Prices vary by supplier, haul distance, and quantity, but expect roughly $20 to $40 per cubic yard delivered for basic fill-dirt in the Meggett area. A typical tri-axle load (about 10–12 cubic yards) will often fall in the range of $200 to $480. For an exact price, use Hello Gravel to get a local quote—minimum orders start at 3 tons and delivery timing affects cost.

Fill-dirt is mostly subsoil with little organic matter used to raise grades and fill holes; it compacts well but does not support planting. Gravel is crushed stone used for drainage, driveways, and stable surfaces and will not settle like loose dirt. Choose fill-dirt when you need to build up ground; choose gravel when you need a stable, draining surface.

A common tri-axle dump truck in our network carries about 10–12 cubic yards of loose fill-dirt, which is roughly 11–15 tons depending on moisture and soil density. Cost per truckload in the Meggett area usually falls in the $200–$500 range, depending on distance, access, and how much you order. Use Hello Gravel to compare local supplier quotes and delivery fees for the most accurate number.

Yes—fill-dirt is generally cheaper than topsoil because it is subsoil with little organic matter and is intended for structural fill rather than planting. Topsoil costs more because it is screened and has organic material suitable for lawns and gardens. If you plan to plant, budget for a separate topsoil or compost layer on top of compacted fill-dirt.

You can put gravel over dirt, but the dirt must be properly prepared first: remove soft organic topsoil, compact the subgrade in lifts, and add a crushed-stone base if needed to prevent rutting. In coastal Lowcountry soils around Meggett, high moisture and poor drainage can cause settling, so good compaction and a geotextile fabric or base layer are often recommended. Drivers may drop material but typically will not compact it, so plan to rent compaction equipment or hire a contractor.

Yes—fill-dirt is commonly used to raise low spots and level yards, but it should be placed and compacted in layers (lifts) to avoid future settling. For best results in Meggett’s humid subtropical climate, compact 6–12 inch lifts with a plate compactor or roller and allow for some settlement before installing sod or hardscapes. If you need soil for planting, add a 4–6 inch layer of topsoil over the compacted fill-dirt.

Measure the area (length x width) in feet and the depth you need in inches, then compute cubic yards: (length x width x depth in feet) / 27. As a quick conversion, 1 cubic yard ≈ 1.1–1.3 tons for fill-dirt, so multiply cubic yards by that factor to estimate tons. Add 5–10% extra to account for compaction and grade smoothing, then enter your zip code on Hello Gravel for a precise quote and minimum order checks.

Small amounts of fill-dirt for typical yard grading usually do not need permits, but larger fills, changes to drainage, work near wetlands, or shoreline projects in the Charleston County area may trigger permitting from the Town of Meggett, Charleston County, or state/federal agencies. Before major grading or landform changes, check with local planning and the South Carolina Department of Health and Environmental Control to confirm requirements. If in doubt, ask our sales team and we can help you flag potential local restrictions when getting a quote.

Provide clear access notes at checkout: gate codes, preferred drop location, overhead wires, tight driveways, septic fields, and any bridges or low-clearance roads. Many delivery trucks are tri-axle and need room to maneuver; if access is tight the driver may have to dump from the road or a different location. Request tailgate spreading at checkout if you want it, but note that drivers perform spreading at their discretion and it is not guaranteed.