Fill Dirt delivery in Aloha, OR

Yes, fill dirt is typically cheaper than crushed gravel in Aloha. Fill dirt is mostly soil with minimal rock and is used to raise or level ground, so per cubic yard it usually costs less than gravel; final price varies by accessibility, volume, and moisture and Hello Gravel minimums and delivery fees apply.

Fill dirt is mostly soil and fine particles used to build up low spots and create a subgrade, while gravel is crushed rock used for drainage and load-bearing surfaces. In Aloha you would use fill dirt to raise grade and compact, then place gravel on top where drainage and strength are required.

Prices vary by supplier and site conditions, but in Aloha you can generally expect delivered fill dirt to range roughly from $10 to $30 per cubic yard depending on hauling distance, site access, and moisture. Hello Gravel requires a 3-ton minimum order and exact pricing is shown at checkout based on your zip code and delivery options.

Use the rule: cubic yards = area (sq ft) x depth (inches) / 324. For example, 1,000 sq ft raised 1 inch needs about 3.1 cubic yards, 2 inches needs about 6.2 cubic yards, and 6 inches needs about 18.6 cubic yards.

Yes, fill dirt can be used to raise or level a backyard, but you should add it in layers and compact each lift to avoid future settling. In Aloha's wet winters, compacted fill plus a final layer of clean topsoil for lawns or planting is recommended to ensure good drainage and plant health.

Hello Gravel deliveries typically use tri-axle dump trucks, which commonly carry about 10 to 12 cubic yards of loose fill dirt per load depending on local material density. That equals roughly 8 to 14 tons for most fill soils, so check the specific weight on your order and our minimum 3-ton requirement.

A rough conversion is 1 ton ≈ 0.8 cubic yards, so 1 ton will cover about 250 to 260 sq ft at 1 inch depth. Coverage changes with depth and material compaction, so calculate required cubic yards first and convert to tons for ordering.

No, 2 inches of fill dirt is not suitable for a driveway surface. Driveways need a compacted load-bearing base—typically several inches of crushed rock or gravel—while fill dirt can be used to build the subgrade before placing and compacting the proper base materials.

You can place fill dirt over existing soil, but best practice is to remove sod or organic topsoil in the area, add fill in thin lifts (4 to 6 inches), and compact each layer to reduce future settling. Drivers can perform tailgate spreading at their discretion, but for even compaction and grading it's often better to spread and compact with equipment after delivery.

Get multiple quotes from local suppliers through Hello Gravel to compare delivered price, minimums, and truck access costs; ordering larger volumes and scheduling standard delivery (2+ business days) usually reduces per-unit cost. Also confirm the material is clean fill (no debris or contamination) to avoid disposal or permitting issues that can increase project cost.