Gravel delivery in Norton, OH

Prices vary by type and supplier, but in Norton and West Ohio expect a rough range of $25 to $60 per ton for common gravels. Decorative or specialty gravels cost more. Final price depends on material type, delivery distance, and any local fees, so check our checkout or request a quote for a precise number.

For basic crushed gravel in the Norton area the average is often between $30 and $45 per ton. This reflects common regional materials and typical delivery charges. For an exact price use our site to check your zip code or contact our team for a quote.

Most customers see three common types: crushed stone (angular stone good for compaction), river rock or pea gravel (rounded stones for decoration), and crusher-run or gravel with fines (mixed sizes with stone dust for a stable base). Local suppliers in West Ohio may use limestone, trap rock, or river-washed materials depending on geology.

#57 gravel is about 3/4 inch to 1 inch, made of angular crushed stone with good drainage and compaction. In Norton it is commonly used for driveways, walkways, and as a base under concrete. Its angular shape helps it lock together when compacted, reducing movement.

#3 gravel is much larger, typically 1.5 to 3 inches in diameter and made of larger crushed stone. It is used for heavy-duty drainage, large backfill, or decorative rock where larger stones are needed. In Ohio it is common around culverts, dry creeks, and areas requiring rapid drainage.

#5 gravel is generally 1/2 to 1 inch crushed stone, smaller than #57 but still angular. It is used for pipe bedding, drainage trenches, and as a finish layer in some driveways and walkways. Local suppliers may label sizes slightly differently, so check photos or ask your hauler before delivery.

A u00224u0022 river rock refers to roughly 3 to 5 inch diameter rounded stones, about the size of a small fist. In Norton this material is used for large landscape basins, dry creek beds, and decorative accents. Because river rock is rounded it does not compact well, so it is typically used for drainage or decoration rather than a driving surface.

A standard tri-axle dump truck that we commonly arrange holds about 10 to 12 cubic yards or roughly 12 to 14 tons of gravel, depending on material density. Larger end-dump trucks can carry more, while smaller trucks carry less. Exact capacity depends on truck type and local hauling rules.

Cost equals the per-ton or per-yard price multiplied by the truckload size plus delivery fees. For example, at $40 per ton a 12-ton tri-axle load would be about $480 for material before delivery and extras. Use our checkout to see exact truckload pricing for your Norton address and selected material.

For small projects the cheapest option is usually buying bulk (minimum 3 tons with Hello Gravel) rather than bagged stone, or coordinating a shared delivery with neighbors to split a truck. Recycled crushed concrete can also be less expensive than new stone, but check local availability and suitability for your use. Always compare material type, delivery, and any spreading labor in the total cost.

For Norton and other West Ohio areas a compactable crushed stone mix (such as a 3/4u0022 crushed stone with fines or a crusher-run base topped with #57 or #411) works best. Use a well-compacted base of larger stone and a 3/4u0022 to 1u0022 wearing layer for drainage and freeze-thaw durability. For heavy vehicles or poor soils increase depth and consider geotextile fabric to reduce washout.

No, 2 inches is generally not enough for a driveway in Ohio. For passenger cars aim for 4 inches compacted over a stable base, and for trucks or heavy use consider 6 inches or more. Proper grading, compaction, and drainage are especially important in Norton because of seasonal freeze-thaw and runoff.

One cubic yard equals 27 cubic feet and covers about 324 sq ft at 1 inch depth, 162 sq ft at 2 inches, 108 sq ft at 3 inches, and 81 sq ft at 4 inches. For typical driveway planning in Norton use the 4-inch number as a guide, and convert cubic yards to tons (roughly 1.2 to 1.6 tons per cubic yard depending on material) to order accurately. Use our material calculator or contact us to confirm quantities for your exact dimensions.

Cost depends on driveway width, depth, and material. As an example, a 100 ft long by 12 ft wide driveway at 4 inches deep is approximately 1,200 sq ft and needs about 14.8 cubic yards (roughly 20 to 25 tons depending on material). Multiply the tons by the local per-ton price and add delivery to estimate your total, or request a quote from Hello Gravel for a firm price.