Gravel delivery in Kimbolton, OH

For 1,000 sq ft, plan roughly: 2" depth = about 8.3 tons, 3" = about 12.5 tons, 4" = about 16.7 tons. These estimates assume typical crushed stone weight (about 1.35 tons per cubic yard); always round up and factor in compaction and waste.

Crushed limestone and crushed stone (3/4" minus) are common for driveways because they lock together and compact well in freeze-thaw cycles. Pea gravel is attractive for paths but moves under traffic and may require edging; stone dust or fines help bind material but can become muddy if drainage is poor.

Material pricing varies by type and season, but expect roughly $20-$50 per ton for common gravels in West Ohio, plus delivery. Delivery and basic spreading can add $50-$300 depending on distance and service; full installation with base prep and compaction typically runs higher, often $0.50-$2.00 per sq ft for labor.

Hello Gravel serves nationwide with local suppliers, but availability depends on your zip code; check our site or contact our team. Our platform minimum order is 3 tons; some local suppliers or trucks may have higher minimums or delivery fees.

Permit and HOA rules vary locally. Kimbolton is a small village, but you should check the Village of Kimbolton office, Madison County zoning, and any HOA rules before installing a driveway to confirm setback, impervious surface, or appearance requirements.

Excavate to create a uniform subgrade, remove organic material, and install 4"-6" of compacted crushed stone base for driveways (more on heavy-use areas). Use geotextile fabric on clay or steep slopes, add edging to retain material, and compact in 2" lifts with a plate compactor for a firm surface.

Gravel drains better than asphalt or concrete and can reduce surface runoff when properly installed with a compacted base and drainage swales. On clay soils and steep slopes, add geotextile, edging, and grading or install trench drains to prevent washouts and migration of fines.

Typical maintenance includes annual light grading to redistribute material, topping up 0.5"-1" every 2-5 years, and occasional weed control. Annual costs commonly range from $50-$300 for homeowners; contractor grading or regrading after heavy storms can cost more.

Gravel is usually cheaper upfront (often $1,000-$3,000 for a 1,000 sq ft area) and remains cost-effective for low- to medium-traffic driveways, with periodic topping up. Asphalt has higher initial cost ($3,000-$7,000 for 1,000 sq ft) and requires sealcoating and resurfacing over 10 years, so total 10-year costs can be similar or higher depending on maintenance and use.

Compact the subgrade to a firm condition, place aggregate in 2" lifts, and compact each lift with a plate compactor until stable. Aim for a well-draining base of 4"-6" of crushed stone for driveways, and consider a thicker base where frost heave or heavy loads are expected.

Common add-ons include geotextile fabric ($0.50-$1.50 per sq ft), edging (timber, steel, or concrete, $2-$8 per linear ft), compaction service ($100-$300), and professional spreading ($100-$400). Prices vary by supplier, delivery distance, and local labor rates; check your Hello Gravel quote for exact amounts.

Natural stone and aggregate vary slightly in color, texture, and size between quarry batches. This is normal and doesn't affect performance; photos represent typical appearance.

Absolutely. You can browse our project guides, use our material quiz, or call us directly. We're happy to help you pick the right material for your project.