Gravel delivery in Pembroke, NC

It depends on the depth you want. For a 2-inch layer you would need about 8.6 tons (round up to 9 tons), and for a 3-inch layer about 13 tons. Regional material density and rock type can change the exact amount, so we recommend getting an exact quote through Hello Gravel before ordering.

A good rule of thumb for common crushed gravel is about 115 sq ft at 2 inches depth and about 77 sq ft at 3 inches depth. Coverage varies by rock type, gradation, and moisture, so use these as estimates and confirm with your supplier for Pembroke-specific materials.

People usually mean either a ton or a cubic yard when they say a unit. One cubic yard is about 1.4 tons of gravel; Hello Gravel’s minimum order is 3 tons. Prices vary by material and local supply; request a quote on our site to get current pricing and delivery options for Pembroke.

Costs depend on truck size, material type, and delivery distance. A typical tri-axle dump truck delivers roughly 12–16 cubic yards (about 17–22 tons for gravel), and prices for a full truck vary widely, so get a quote from Hello Gravel for an accurate price and to see if free delivery applies for your zip code.

Generally no; 2 inches is usually too thin for a long-term driveway. For a stable driveway you typically need a compacted base of 4–6 inches of larger crushed stone and a 2–3 inch wearing layer on top. Local soil and drainage in Pembroke affect how thick the base should be, so consider a site assessment or ask our team for guidance.

Costs depend on the driveway width, depth, and material selected. For a single-car driveway 20 ft long by 10 ft wide at a 3-inch depth you’d need about 3 tons (Hello Gravel minimum is 3 tons), so material plus delivery often falls in the low hundreds of dollars; request a quote for an exact price based on material choice and your address in Pembroke.

It depends on the truck. Hello Gravel typically uses tri-axle trucks that often carry about 12–16 cubic yards, which for gravel is roughly 17–22 tons depending on material and local weight limits. If you need a specific tonnage for your delivery, tell us and we will confirm with the hauler assigned to your order.

Yes, but preparation matters. For best results remove vegetation, grade and compact the soil, add a geotextile fabric if you want weed control, and consider a compacted base layer of larger stone before finishing with surface gravel. Pembroke’s local soils and drainage conditions can make a base and proper grading especially important to prevent rutting and washout.

Buying in bulk, choosing common local materials, and scheduling delivery during normal business days typically lowers cost. Using Hello Gravel to connect with nearby suppliers can reduce haul charges, and picking up material yourself from a local supplier is sometimes cheaper if you have the right truck and equipment. Always compare per-ton and delivery fees when evaluating options.

A full cubic yard is 27 cubic feet and may physically fit in some full-size pickup beds, but the weight often exceeds a pickup’s payload rating. For safety and legal reasons, many homeowners find it better to order delivery or rent a small truck to avoid overloading; check your truck’s payload and local road laws before loading a yard of gravel.

For a 20x20 area (400 sq ft) you’d need about 4 tons for a 2-inch layer and about 6 tons for a 3-inch layer. Because Hello Gravel has a 3-ton minimum, you would typically order at least 3–6 tons depending on your chosen depth and compaction plan; get an online quote to see delivery pricing for your Pembroke address.