Fill Dirt delivery in Hubert, NC

Local delivery costs for fill dirt in Hubert commonly depend on haul distance, supplier, and order size. Expect delivered prices often in the range of about $20 to $45 per cubic yard (roughly $25 to $60 per ton), with smaller orders and long hauls at the higher end. Hello Gravel has a 3-ton minimum and offers free delivery in many areas, but exact cost will be confirmed at checkout and can vary by supplier and site access.

For yard grading in Hubert, choose screened clean fill dirt with low organic content so it settles predictably and resists long-term settlement. For driveways, avoid plain fill dirt as the top structural layer; use compactable structural fill or a crushed stone base topped with gravel for drainage and stability in coastal rain events. Because Hubert is coastal, ask suppliers for locally sourced material and note regional variations when ordering.

A typical 2-car driveway around 20 ft by 20 ft (400 sq ft) raised 3 inches (0.25 ft) requires about 3.7 cubic yards of material. Converting to weight, that is roughly 4.5 to 5.0 tons (assuming 1.2–1.4 tons per cubic yard). Order 10% extra to allow for compaction and grading, so plan for about 4.1 cubic yards (about 5.0–5.5 tons) for a standard 2-car area.

Fill dirt can wAsh or erode if placed on steep slopes or left uncompacted, especially during heavy rain or hurricanes common near Hubert. PRoper compaction, grading to direct water away, erosion control (silt fences, mulch, or temporary cover), and using a drainage layer or crushed stone for exposed areas reduce wAshout risk. For high-exposure sites, consider engineered fill, geotextile, or retaining structures and consult a local contractor for storm-prone pRoperties.

Yes. Hello Gravel connects you with trusted local suppliers and hauling partners that deliver fill dirt in the Hubert area and nearby coastal communities. For compaction and installation, we recommend hiring a local landscaper or contractor experienced with coastal soils; contact our team at 855-241-8884 or text 844-407-3734 and we can help match you to suppliers and suggest local pros. Always confirm any compaction or spreading services with the supplier and request them at checkout, since driver spreading is subject to discretion.

For driveway bases, crushed stone or a mixture of structural aggregate is preferred because it compacts well and provides drainage, while plain fill dirt is better suited for raising grade or backfilling where drainage is not required. For septic systems and areas with high water table common near coastal Hubert, follow local health department rules—typically gravel or specified sand is used for drain fields, while clean, compactable native soil may be used for other backfill. When in doubt, check local code or consult an engineer or septic contractor before placing fill.