Gravel delivery in Currituck, NC

Delivered gravel prices in Currituck vary by material, truck access, and quantity. Expect a broad delivered range of roughly $40 to $120 per ton (or about $30 to $90 per cubic yard) depending on whether you choose basic bank-run material, crushed stone, or decorative rock. Hello Gravel requires a 3-ton minimum and provides an exact delivered price once you enter your zip code and pick a material.

Installation costs depend on width, depth, site prep, and local labor rates. For a typical single-car 20' x 10' driveway expect a total range of about $700 to $2,000 for materials, delivery, and basic labor; a larger or more heavily prepared job can cost more. Get a site-specific quote through Hello Gravel and local contractors for the most accurate number.

For most Currituck driveways we recommend a compacted base of 4 to 6 inches of larger, free-draining stone (for example #3 or crushed stone) topped with 2 to 3 inches of finer surface stone (for example #57). If you have very soft or marshy ground near the Currituck Sound, increase the base to 6 to 8 inches and add a geotextile fabric to improve stability and drainage. Proper drainage and slope are especially important in coastal areas to reduce erosion and standing water.

For driveways in Currituck, a layered approach performs best: use larger stone like #3 or crusher-run for the compacted base and a finer stone like #57 or small crushed stone for the top surface. Crushed stone (crusher-run) compacts well and is cost-effective for bases, while #57 gives a stable, attractive surface with good drainage. For landscaping and erosion control near the Sound, coarser washed gravels or angular rock perform better than rounded river rock.

The most affordable options are usually bank-run or unwashed crushed stone and crusher-run materials, which are commonly priced at the lower end of the delivered range. Expect budget materials to fall near the lower estimates (often around $30 to $60 per cubic yard or $40 to $70 per ton depending on delivery). Pricing varies by supplier and truck access, so check your zip code in Hello Gravel for exact local rates.

Using common dimensions: a single-car driveway (20' x 10') contains 200 sq ft. At a 3-inch depth that is about 1.85 cubic yards (roughly 2.6 tons); at a 6-inch depth it is about 3.7 cubic yards (roughly 5.2 tons). A double-car driveway (20' x 20') doubles those amounts: about 3.7 cubic yards (5.2 tons) at 3 inches and 7.3 cubic yards (about 10.2 tons) at 6 inches. These ton estimates assume roughly 1.4 tons per cubic yard; local stone density varies, so order a little extra and confirm with your Hello Gravel quote.

One cubic yard of gravel typically weighs between about 2,400 and 3,000 pounds (about 1.2 to 1.5 tons), which can exceed the safe payload of many standard pickup trucks. Because of that weight and the difficulty of loading/unloading, delivery by a dump truck is usually preferable and safer for most homeowners. If you plan to pick up material, check your truck's payload rating or use a trailer rated for the load, and consider the minimum order and delivery options from Hello Gravel.

Some local suppliers and contracted haulers can provide tailgate spreading at the driver's discretion, and a few offer spreading and compaction as add-on services through local contractors. Prices vary widely by job size and site complexity; simple tailgate spreading, when available, may be quoted as a small fee at checkout, while full spreading and compaction by a contractor can range from roughly $100 to several hundred dollars. Request spreading or compaction when you order and ask for a separate labor quote if you need a full install.

Yes, coastal properties and narrow roads can trigger access restrictions and extra charges. Common issues include limited truck access, weight or bridge restrictions, long driveway fees, offload difficulty charges, or permit requirements for public right-of-way work. Hello Gravel will assess access when you request a quote and note any extra fees; drivers will also perform a safety/site assessment on arrival and may decline risky offloads.

Saltwater exposure and coastal storms do affect material choice. Use non-reactive, angular stones like crushed granite or crushed stone for durability, and prefer coarser rock and geotextile fabric for erosion control; avoid materials that break down quickly in salt air. For shoreline or high-erosion areas consider engineered solutions (riprap, coir logs, or professional hydroseeding) and consult local regulations before altering shorelines.