Gravel delivery in Asheville, NC

Prices vary by type and delivery, but expect about $35-$80 per ton delivered in the Asheville area depending on stone type and load size. A typical tri-axle dump truck load (roughly 10-16 tons) will therefore run from about $350 to $1,280 before any special fees. Hello Gravel requires a 3-ton minimum and offers standard delivery in 2+ business days; next-day delivery is available for orders placed before noon CST for an extra fee.

Coverage depends on depth. At 2 inches you need about 6-7 cubic yards (roughly 8-9 tons), and at 3 inches about 9-10 cubic yards (roughly 12-13 tons). Always add 5-10% for waste, compaction, and grading, and remember local stone density can change the tonnage slightly.

One ton of gravel covers roughly 115-130 sq ft at a 2-inch depth, depending on stone type and compaction. Heavier crushed stone will cover a bit less area, while lighter washed or river rock may cover more. Use these figures as an estimate and check with your Hello Gravel quote for exact coverage based on the product you select.

A typical tri-axle dump truck carries about 10-12 cubic yards (roughly 13-16 tons), which will cover around 1,600-1,950 sq ft at a 2-inch depth. Coverage drops as you increase depth (for example, half that area at 4 inches). Local truck sizes vary, so confirm the truck capacity on your order if you need a precise coverage estimate.

Cost depends on length and depth; as an example, a 20 ft by 40 ft driveway (800 sq ft) installed at a 3-inch depth needs about 7.5 cubic yards (around 9-10 tons). At $35-$80 per ton, material cost would be approximately $315-$800 plus delivery and any labor or compaction costs. Ask Hello Gravel for a tailored quote to include local stone type and delivery fees.

For most driveways 2 inches is too thin—it tends to shift and rut, especially with Asheville's higher rainfall and mountain run-off. We recommend at least 3-4 inches compacted for a residential driveway and 4-6 inches for regular vehicle traffic. Consider a compacted crushed stone base (bedding) under a top layer for better long-term performance.

Cost depends on width and depth; for a common single-car width of 12 ft by 100 ft (1,200 sq ft) at 3 inches depth you need about 11-12 cubic yards (around 14-16 tons). At $35-$80 per ton, material cost would typically fall between about $490 and $1,280 plus delivery and site prep. Get a Hello Gravel quote that includes the exact product and any delivery or access fees.

Ordering bulk gravel delivered by dump truck is usually the most cost-effective method per ton versus buying bagged material. Choose locally sourced, common aggregate types (screened crushed stone or native gravel) to keep costs down, and plan for a 3-ton minimum with Hello Gravel. If you have access to a trailer, small loads from a local supplier can work, but delivery gives better economy and less labor.

Ten cubic yards will cover about 1,620 sq ft at a 2-inch depth and about 1,080 sq ft at a 3-inch depth. For driveways or heavier use where you need 3-4 inches, expect coverage nearer the lower end. Always allow for grading and compaction when planning coverage.

A 20x20 area is 400 sq ft; at 3 inches depth you need about 3.7 cubic yards (about 4.5-5 tons). With Asheville delivered prices of $35-$80 per ton, material cost would usually be in the $160-$400 range plus delivery and any placement or compaction fees. Hello Gravel can provide an exact delivered price based on the stone you choose.

A properly installed gravel surface can last 10-20+ years with routine maintenance such as occasional top dressing, grading, and adding fresh stone every few years. Asheville's rainy climate and hillside sites may require more frequent maintenance to manage erosion and washouts. Regular edging, proper drainage, and compaction after installation lengthen lifespan.

A 7x14 dump trailer will typically carry between about 4 and 7 cubic yards of material depending on the sidewall height and trailer capacity. Manufacturers and trailer setups vary, so check your trailer's manufacturer capacity and legal gross vehicle weight before loading. For larger projects in Asheville, a truck delivery is usually simpler and more economical than hauling many trailer loads.

Five tons of gravel is roughly 3.5 to 4 cubic yards depending on stone density, which makes a pile that covers about 560-650 sq ft at a 2-inch depth. Visually, it will form a modest mound roughly 4-6 feet high if stacked in one spot. Remember to plan placement so trucks can dump where you need it, and add a bit extra for compaction and grading.

For a typical single-car driveway 12 ft wide by 40 ft long (480 sq ft), you'll need about 4.5 cubic yards at 3 inches depth—roughly 5.5-6.5 tons depending on stone density. If you want a sturdier base, increase depth to 4 inches which raises the quantity to about 6 cubic yards. Hello Gravel recommends ordering a little extra for compaction and grading, and can help calculate quantities for your exact dimensions.