Gravel delivery in Schenectady, NY

Tri-axle dump trucks that Hello Gravel typically uses carry about 10-12 cubic yards (roughly 7.5-14 tons depending on gravel type). In the Schenectady area a single truckload usually runs in the low hundreds to around $1,000+, depending on material type, tonnage, and delivery details; contact us for a precise quote. Remember our minimum order is 3 tons and standard delivery requires 2+ business days, with next-day available for orders placed before noon CST.

Price per ton varies by type (crushed stone, pea gravel, reclaimed) and local quarry supply, but expect a typical range of about $20-$60 per ton in the Albany-Schenectady area. Final price depends on your exact material choice and delivery; request a quote on our site for a firm number.

Buying in bulk (3 tons or more) from local suppliers and scheduling standard delivery is usually the most cost-effective option. You can also save by choosing common base materials like crusher run and by picking up material yourself from a nearby quarry, but check truck payload limits and local ordinances first.

One cubic yard of gravel is 27 cubic feet and will cover about 162 sq ft at a 2-inch depth, about 108 sq ft at 3 inches, or about 81 sq ft at 4 inches. Weight varies by type (typically 1.2–1.5 tons per cubic yard), so quantities and coverage can change with regional stone types.

Cost depends on width and depth; a typical one-car driveway (about 20 ft long by 10–12 ft wide) requires roughly 1.5–2.5 cubic yards of surface gravel, but Hello Gravel’s minimum is 3 tons so you may order slightly more. Expect material-plus-delivery costs to commonly range from a few hundred dollars to more if you choose decorative stone or need additional base or spreading services; get a tailored quote for exact pricing.

Two inches is generally too thin for a long-lasting driveway in Schenectady’s freeze-thaw climate; we usually recommend 4–6 inches of compacted gravel over a stable base for vehicle traffic. If you already have a compacted crushed-stone base and only need a light surface, 2 inches can work as a temporary solution, but it will require more frequent top-ups.

Crusher run (also called dense grade aggregate or DGA) is commonly the most economical and practical choice for driveways because it compacts well and forms a stable surface. Decorative gravels like pea gravel cost more and tend to shift, increasing maintenance and long-term cost.

Coverage varies by stone density, but as a rule of thumb 1 ton of gravel will cover roughly 80–120 sq ft at a 2-inch depth, about 55–80 sq ft at 3 inches, and 40–60 sq ft at 4 inches. These are approximate; order a little extra to allow for settling and regional density differences.

A 20x20 driveway is 400 sq ft; at 4 inches depth you would need about 4.94 cubic yards (round up to 5–6 yd3) which typically weighs around 6–9 tons depending on material. Material-plus-delivery costs for that quantity in the Schenectady area commonly range from several hundred to a couple thousand dollars depending on stone type and any spreading or base preparation needed; request a quote for specifics.

You can put gravel over dirt, but for durability you should remove vegetation, compact the soil, and ideally install a geotextile fabric and a compacted base layer before the surface gravel. Skipping prep is quicker but in Schenectady’s wet and freezing winters it often leads to rutting, washout, and more frequent maintenance.

Free gravel is uncommon; sometimes municipalities, road crews, or construction sites have scrap or fill material available but availability, quality, and legality vary. Check Schenectady city DPW programs, local classified listings, or community groups, and be cautious about using unknown or recycled material without testing for suitability.

Per-cubic-yard prices in this region can range widely by type, commonly from about $20 to $80 per cubic yard, so 100 cubic yards could run roughly $2,000 to $8,000 for material alone, with delivery and spreading extra. For large orders like this contact our team for volume pricing and delivery logistics.

A typical tri-axle truck carries about 10–12 cubic yards; at a 2-inch depth that covers roughly 1,620–1,944 sq ft, at 3 inches about 1,080–1,296 sq ft, and at 4 inches about 810–972 sq ft. Exact coverage depends on the truck’s actual cubic yards and the stone depth you want—ask us and we will calculate coverage for your project.

One cubic yard is 27 cubic feet, roughly a 3 ft by 3 ft by 3 ft cube; spread out at 2 inches deep it covers about 162 sq ft. If you want a visual before ordering, we can help estimate how a yard or multiple yards will look on your actual driveway or yard.

Many full-size pickup trucks can carry about 1–2 cubic yards of loose gravel by volume, but weight is the limiting factor—gravel can exceed a truck’s payload and damage the vehicle if overloaded. If you plan to pick up material yourself in Schenectady, check your truck’s payload rating and consider ordering delivery through Hello Gravel to avoid overloading and to meet our minimums.