Stone in Houston, MN

Standard delivery for stone to Houston, MN is 2+ business days when ordered through Hello Gravel. If you need it faster, next-day delivery is often available for orders placed before noon CST for an extra fee; availability depends on local supplier schedules and truck routing.

Typical delivered prices for common crushed stone in Houston range from about $35 to $60 per ton, which is roughly $50 to $90 per cubic yard (using 1.5 tons per cubic yard). If you request tailgate spreading, expect an extra fee or higher total—spreading costs are often a flat $100-$400 or a $10-$30/ton range depending on supplier and job complexity.

For Houston's freeze-thaw cycles, a layered approach works best: 1-1/2u0022 clean crushed stone or 2-3u0022 aggregate for the base, with 3/4u0022 crushed stone (with some fines) as the surface. Angular, crushed stone compacts and locks together better than rounded rock, which helps resist frost heave and snowplow damage.

Use roughly 1.5 tons per cubic yard. For 1,000 sq ft: 2 inches needs about 6.2 yd3 or ~9.3 tons; 3 inches about 9.3 yd3 or ~13.9 tons; 4 inches about 12.35 yd3 or ~18.5 tons; 6 inches about 18.5 yd3 or ~27.8 tons. Always round up for compaction and waste and remember Hello Gravel has a 3-ton minimum order.

Some local suppliers and contractors near Houston do offer spreading and compaction as an add-on, but it varies by supplier and trucker. Fees typically include tailgate spreading, light grading, and compaction with a plate compactor or small roller, and can range from a few hundred dollars for small jobs to $800-$1,500 for larger driveways; confirm specifics and safety limits before checkout.

Crushed stone with angular particles drains very well and holds up to snowplow traffic when properly profiled and compacted, often outperforming rounded gravels. Crushed limestone compacts well but can break down faster under heavy salt and freeze-thaw; recycled concrete varies by source and may have more fines that reduce drainage. For best snowplow durability in Houston, pick angular, hard stone and keep surface depth consistent.

Permit rules vary; many residential driveways in Houston do not need a permit, but curb cuts, changing drainage patterns, or work near the road or right-of-way often require city or county approval. Check with Houston City Hall or Houston County public works before starting to confirm culvert, setback, and stormwater requirements.

Typical maintenance includes annual grading to remove ruts, adding infill every 1-3 years, and seasonal pothole patching. For a 1,000 sq ft driveway expect to add 1-3 tons of stone every 1-3 years depending on traffic and winter conditions; DIY maintenance is low cost (material only), while hiring someone for grading/repairs may run $150-$500 per visit.

Hard igneous stones like granite or trap rock resist salt and freeze-thaw best because they are dense and less porous. Avoid softer or highly porous materials when you plan heavy de-icing; also follow local de-icing best practices to minimize long-term surface damage.

Contractors typically source stone from regional quarries and pit suppliers in southeast Minnesota and nearby areas; local sourcing is common because it keeps truck mileage and costs down. Local geology affects color, angularity, and hardness, so materials from nearby quarries will look and perform differently than stone hauled from farther away.