Gravel delivery in Redford, MI

Delivered prices in Redford vary by gravel type, supplier, and delivery distance. For an accurate, up-to-date price enter your zip code on our site or request a quote; typical delivered prices in Southeast Michigan often fall within a mid-range band but will change with material and season. Keep in mind our minimum order is 3 tons and delivery fees may apply depending on distance and truck size.

A common tri-axle dump truck carries roughly 10 to 12 cubic yards (about 14 to 18 tons) of loose gravel; cost depends on material price per yard and delivery fee. To estimate, multiply the per-cubic-yard price by the truck capacity and add any delivery or placement fee; request a quote for exact pricing in Redford. If you need less than a full truck, we can quote smaller orders or combine loads when available.

Use the formula cubic yards = (length ft × width ft × depth in) / 324. For example, a single-car driveway 20 ft long by 10 ft wide at 3 inches deep needs about (20×10×3)/324 = 1.85 cubic yards, roughly 2.6 tons (using ~1.4 tons per cubic yard). Double that width (20×20 at 3u0022) would need about 3.7 cubic yards, or roughly 5.2 tons.

Two inches is thin for a functional driveway in Redford's freeze-thaw climate; we usually recommend 3 inches of compacted finish gravel over a properly prepared base for light residential use. For heavier vehicles or poor subgrade soils, plan on a 4 to 6 inch compacted base (crush-and-run or recycled aggregate) plus a 2 to 3 inch surface layer. Proper base and drainage help limit frost heave and rutting in Michigan winters.

Putting finish gravel directly over loose dirt is not recommended in Redford because it settles and shifts with freeze-thaw cycles; proper base prep significantly improves longevity. Typical prep includes removing topsoil, compacting the subgrade, and adding 4 to 6 inches of compactable base material (crush-and-run) before a 2 to 3 inch surface layer. That prep adds material: for example, a 20×10 area with a 4u0022 base requires about 2.47 cubic yards (roughly 3.5 tons) of base material in addition to the surface gravel.

Total cost depends on material type, depth, delivery distance, and whether you hire labor for grading and compaction. As a ballpark, expect material plus delivery for a modest single-car 20×10 driveway at 3u0022 depth to be a few hundred dollars, with additional costs if you add base material, compaction, or contractor labor. For an accurate number, request a quote with your zip code and project details through our site or speak with our team.

For Redford's climate, a compactable base like crush-and-run (with fines) for the lower layers and a crushed stone or #57 stone (3/4u0022 minus or 3/4u0022 clean stone) for the surface are common choices. Crush-and-run compacts well and resists movement, while angular crushed stone on top gives drainage and traction; washed round gravel drains well but can be mobile under traffic. Consider adding geotextile fabric and a thicker base if you have clay soils or poor drainage common to parts of Michigan.

Coverage varies with depth. As a rule of thumb using 1.4 tons per cubic yard: one ton covers about 115 sq ft at 2 inches, about 77 sq ft at 3 inches, and about 58 sq ft at 4 inches. Always order 5 to 10 percent extra to allow for compaction and minor grading losses.

Yes—Hello Gravel works with local suppliers that deliver to Redford, but availability depends on zip code and local fleet capacity. Standard delivery lead time is 2+ business days, with a next-day option for orders placed before noon CST for an additional fee; some areas may have free delivery while others add a distance-based charge. Check your zip on our site or request a quote to see specific fees and the soonest delivery date for your address.

Use this simple formula: cubic yards = (length ft × width ft × depth in) / 324, then convert to tons by multiplying cubic yards by about 1.4 (tons per cubic yard for typical gravel). For a 20×40 area at 3u0022 depth: (20×40×3)/324 = 7.41 cubic yards, or roughly 10.4 tons. Add 5 to 10 percent extra for compaction, spreading, and waste when placing your order.