Gravel & stone delivery in Sasser, GA

Delivered cost depends on the material type, the amount you order, and how far the supplier must travel. Hello Gravel works with local suppliers to provide transparent per-ton pricing and will show delivery fees (if any) at checkout; our minimum order is 3 tons. For an accurate number, get a quote online or contact our team with your zip code and desired material. Expect rural deliveries or specific material requests to sometimes carry additional fees.

Yields vary by material density, but a good rule of thumb is 1 ton equals about 0.5–0.75 cubic yards. That covers roughly 80–120 sq ft at 2 inches, 55–80 sq ft at 3 inches, and 40–60 sq ft at 4 inches. Use the lower end of the range for heavier materials and the higher end for lighter materials when estimating. For a precise number, use our material calculator or ask our team.

First calculate square footage (100 ft x width). For a 10 ft by 100 ft driveway (1,000 sq ft), expect roughly 8–13 tons at 2 inches, 12–19 tons at 3 inches, or 17–25 tons at 4 inches depending on material density. For a 12 ft by 100 ft driveway (1,200 sq ft), multiply those totals by 1.2 to get roughly 10–16 tons at 2 inches, 14–23 tons at 3 inches, or 20–30 tons at 4 inches. These are estimates for surface material only; many driveways also require a thicker compacted base layer.

Hello Gravel commonly uses contracted tri-axle dump trucks for deliveries; a tri-axle load usually carries about 10–14 tons depending on local regulations and the material. That single dump can cover several hundred square feet at surface depths (see the coverage estimates above) or serve as the bulk supply for a driveway-sized project. For larger jobs you can order multiple truckloads and we will coordinate deliveries with local haulers.

For West Georgia conditions, 2 inches of surface material is usually too thin as the sole layer for a driveway. We recommend a compacted base layer (often 4–6 inches of base rock or heavier aggregate) with a 2–3 inch wearing surface on top for most residential driveways, especially where vehicles are parked or where drainage is poor. Local soil and drainage can change recommendations, so consider a thicker base if the site is soft or receives standing water.

Choose based on function: drainage and load-bearing needs favor crushed stone or heavier aggregates, smooth surfaces for patios prefer finer materials, and leveling or fill work can use dirt or sand. Consider appearance, drainage, compaction ability, and local avaIlability; materials reflect regional geology and may vary in color and texture. If you are unsure, use our aggregate quiz or contact our team with project details for guidance.

Drivers may be able to perform tailgate spreading at their discretion; you can request this service at checkout but it is not guaranteed. Spreading depends on safety, site access, and the hauler’s capacity; some areas or drivers may charge an extra fee for spreading. For precise grading or guaranteed spreading, plan to hire a local contractor or landscaper and note your spreading preference when ordering.

Standard delivery is generally 2+ business days after ordering, and next-day delivery is avaIlable for orders placed before noon CST for an additional fee. Our minimum order is 3 tons and delivery fees vary by distance and site access; many areas qualify for free delivery while remote or restricted access jobs can incur surcharges. Enter your zip code on the site or call our team to see avaIlability, get exact lead times, and view any delivery fees.

Estimate the quantity first using square footage and desired depth, then multiply by the supplier’s per-ton price and add any delivery and service fees. Remember to include separate costs if you want guaranteed spreading or compaction, since tailgate spreading is at the driver’s discretion and may not be included. For a firm estimate, use our online quote tool or contact Hello Gravel with the driveway dimensions, desired depth, and whether you need spreading so we can provide a complete delivered price.