Gravel in Indialantic, FL

Prices vary by supplier, size, and current fuel/haul rates, but expect ballpark ranges: pea gravel $40 to $80 per ton, crushed rock 3/4u0022 to 1u0022 $30 to $70 per ton, and shell/sea shell mix $30 to $60 per ton. Regional sourcing and seasonal demand can move prices, so check your zip code for exact quotes. Remember our minimum order is 3 tons and additional delivery fees can apply for tight access or short loads.

Choose angular, crushed material (3/4u0022 to 1u0022) for a driveway because it locks together and resists washout better than smooth pea gravel. Avoid very fine gravels and loose decorative mixes near high-traffic or erosion-prone areas; crushed stone over a compacted base with edging performs best in storm conditions. If you want a coastal look, pair shell as a top dressing with a stable crushed base, knowing shell can break down and require more frequent topping.

Requirements vary: small residential driveway resurfacing often does not need a town permit, but local zoning, beachfront protection, and HOA covenants may restrict surface materials, colors, or drainage changes. Before ordering, contact the Town of Indialantic planning/building department and review your HOA rules to confirm any restrictions or required approvals. Hello Gravel can deliver the material, but it is your responsibility to secure permits and HOA permission.

Measure length x width x depth (in feet) to get cubic feet, divide by 27 to get cubic yards, then multiply by a density factor to get tons. For most gravel use 1.3 to 1.5 tons per cubic yard (we use 1.4 tons/yd3 as a good rule). Example: a 12' x 40' driveway at 3u0022 depth = 12*40*0.25 = 120 cu ft = 4.44 yd3, roughly 6.2 tons; round up and remember Hello Gravel minimum order is 3 tons.

Hello Gravel connects you with vetted local suppliers and contracted dump truck haulers serving Indialantic and the greater Brevard County area. Typical delivery is by tri-axle dump truck, and most suppliers serve a 25 to 50 mile radius though availability depends on the supplier and material. Enter your zip code on our site for exact local supplier options, delivery fees, and schedule availability.

Gravel drains well but in low, storm-prone yards you should expect more frequent maintenance after heavy rains or tropical storms—plan on inspecting and regrading after major events and topping up high-traffic areas at least once a year. Using larger, angular stone, a compacted base, edging, and geotextile reduces migration and the frequency of repairs. After hurricane season, check for washouts and add material as needed.

Gravel is generally the most cost-effective and easiest to install, with excellent drainage but higher long-term maintenance in windy or eroding spots. Pavers cost more upfront (materials plus installation) but offer the most durability and low maintenance for driveways and heavy use. Shell provides a coastal look and good drainage but breaks down over time and often needs more frequent top-ups; consider combining materials (stable base with shell topping) for best results.

Remove organic topsoil, grade and compact the subgrade, then install a geotextile fabric to separate sand from the gravel and reduce migration. For driveways, place a 4u0022 to 6u0022 compacted crushed-rock base plus a 2u0022 to 3u0022 top layer of your chosen gravel; paths can use a thinner base of 3u0022 to 4u0022. Add rigid edging to keep gravel contained and help the surface shed water during storms.

In Central Florida, the drier months from October through May are the best for installation because there is less rain and lower risk of washout. Before hurricane season (June through November), top up edges, secure loose stockpiles, and avoid placing new loose material in exposed dune or beach-protected zones. If a storm is forecast, move excess material away from vulnerable areas and consult local authorities about coastal protection rules.

A DIY delivery from Hello Gravel covers material and hauling; professional installation adds labor, subbase preparation, compaction, edging, and equipment costs, which can make installed driveways several times the cost of material alone. Exact figures vary by project size and site conditions, but expect installed pricing to include material plus $30 to $80 per hour for labor or a per-square-foot installation rate—get local contractor bids to compare. Ordering materials through Hello Gravel is a good first step to control material costs before requesting install quotes.

Provide clear delivery instructions and photos of the drop area at checkout, note any driveway width limits, overhead wires, or soft sand approach, and select a delivery date that allows for daylight unloading. Request tailgate spreading in Order Notes if you want the driver to consider it, but remember spreading is at the driver's discretion and not guaranteed. If you need help calculating quantities or choosing a material, contact our team at 855-241-8884 or text 844-407-3734.