Gravel delivery in Fruit Cove, FL

Prices vary with supplier and season, but expect roughly $25-$60 per ton in the West Florida/Fruit Cove area: crushed stone and #57 stone around $25-$45 per ton, crushed limestone $30-$50 per ton, and pea gravel $35-$60 per ton. One cubic yard of gravel is about 1.3-1.5 tons depending on moisture and rock type, so a cubic yard typically runs about 1.3-1.5 times the per-ton price. Contact Hello Gravel or local suppliers for exact live pricing and delivery quotes for your zip code.

Hello Gravel partners with local landscape yards and quarries that deliver to Fruit Cove; exact supplier lists and minimums depend on your zip code and stock. Our platform commonly sees minimum deliveries around 3 tons (this is also Hello Gravel's minimum order), and local short-haul delivery fees when charged typically range from about $50-$150 depending on distance, truck type, and site access. Use our website to check suppliers and delivery details for your address or call our team to get supplier-specific minimums and fees.

Installed costs depend on prep and materials: a basic top-dressed gravel surface with minimal prep often runs about $4-$8 per square foot. For a professionally prepared driveway with base excavation, compacted base rock, edging, and proper drainage, expect $6-$12 per square foot. Site access, slope, local labor rates, and whether you add stabilization features will move the price up or down.

Measure length, width, and desired depth in feet, multiply (L x W x Depth) and divide by 27 to get cubic yards. Multiply cubic yards by a compaction/waste factor of 1.05-1.25 (use 1.15 for sandy Fruit Cove soils) then multiply the adjusted cubic yards by about 1.4 to convert to tons. Example: a 20' x 10' path at 3u0022 deep is 20x10x0.25/27 = 1.85 yd3; with 1.15 factor = 2.13 yd3, which is roughly 3.0 tons.

Requirements vary by neighborhood and local code: many St. Johns County jurisdictions allow gravel, but some local zoning rules or HOAs restrict driveway materials, edging, or drainage changes. Check your HOA covenants first and contact the St. Johns County building or zoning office to confirm permitting or impervious-surface rules before starting work. If in doubt, Hello Gravel can help you find local guidelines or recommend contacting the county planning office.

Use angular, crushed stone with a compactable base for drive lanes—#57 or 3/4u0022 minus base rock under a 3/8u0022 to 3/4u0022 wearing layer works well. Avoid loose round pea gravel for primary driveways where vehicle traffic and storms are common; pea gravel is better for decorative paths or low-traffic areas. Adding a geotextile or geogrid and a compacted base layer significantly improves stability on Fruit Cove's sandy soils.

Plan for light maintenance annually (raking, filling low spots) and a material top-up every 2-4 years depending on traffic and storms. Expect delivered material costs in the Fruit Cove area roughly $30-$60 per ton (or about $40-$90 per cubic yard) though exact delivery rates vary. Periodic grading or re-compaction by a pro can add labor costs; use Hello Gravel to price delivered material so you can estimate top-up expenses.

Stabilization is often worth the investment on sandy subgrades and in heavy-rain areas: geogrids reduce rutting and spread loads and typically add a modest cost (roughly $0.50-$2.00 per sq ft plus additional base rock and labor). Resin-bound or paving-grid systems create a very stable surface and reduce maintenance but cost more, commonly $15-$30 per sq ft installed. For most Fruit Cove driveways, a geogrid or thicker compacted base with angular stone gives the best balance of performance and cost.

Yes—seasonal heavy rains and low slopes can cause washout or channeling on gravel surfaces in Fruit Cove. Proper grading, installing swales or shallow ditches, edge restraints, and directing water to established drainage points reduce erosion; where surface water concentrates, use a French drain, culvert, or riprap at outfall points. Check local stormwater rules and design drainage to tie into existing neighborhood systems when possible.

Labor and installation costs vary by scope: simple tailgate spreading for a delivery can be inexpensive or sometimes offered at driver's discretion, while full installation (grading, base, edging, compaction) for a typical residential driveway often ranges from $500 to several thousand dollars depending on size and complexity. Hourly rates for crews in the area commonly fall between $45-$90 per hour for local installers, with total project pricing influenced by site prep, access, and drainage work. Contact Hello Gravel to get delivery and installer recommendations and local cost estimates for your specific project.