Gravel delivery in Fellsmere, FL

Delivered gravel in Fellsmere typically ranges from about $35 to $60 per ton depending on the aggregate type, local supplier, and distance from the quarry. Specialty materials (colored decorative stone or washed limestone) and next-day delivery or small orders can increase the per-ton price. Hello Gravel has a 3-ton minimum and may offer free delivery in many areas; check your zip code for exact pricing and delivery fees.

Hello Gravel connects you with local suppliers and haulers that serve Fellsmere and West Florida; suppliers vary by material and season. Many deliveries are handled by tri-axle dump trucks and some areas qualify for free delivery, but remote locations or small orders can incur delivery charges or fuel surcharges. Always confirm minimum order (3 tons), truck access, and whether you need a permit for offloading before checkout.

For Fellsmere’s sandy soils and high water table, a well-graded crushed stone (like 3/4" crushed stone or #57 with fines for a compactable base) works well for the subbase, topped with 3/8" to 1/2" washed stone for surface stability. Use angular, crushed material rather than rounded river rock so it locks together and resists washout. For extra resilience against groundwater and heavy rain, add geotextile fabric under the base and consider grid pavers or polymer stabilizers.

A typical gravel driveway in Fellsmere should have a compacted base of 4" to 6" and a surface/topcoat of 2" to 3". For a standard 1-car driveway (about 10' x 20'), expect roughly 5 to 8 tons of gravel depending on depth, while a 2-car driveway (about 20' x 20') typically needs about 11 to 16 tons. These estimates assume compacted material and use the common conversion of roughly 1.3–1.5 tons per cubic yard; order a little extra for compaction and future settling.

Contractor-installed gravel driveways in Fellsmere typically range from about $1,200 to $5,000 depending on driveway size, existing site work, and soil conditions. Costs include grading and excavation, base material, installation of geotextile fabric if needed, hauling, and compaction with equipment; difficult access, poor soils, or stormwater work will push the price higher. Ask contractors for itemized quotes and check whether hauling and material are included or billed separately.

Fellsmere’s rainy season (roughly June through October) and occasional heavy storms can cause washout or ruts if drainage is poor. Reduce problems by installing a crowned driveway slope, perimeter ditches or French drains, a compacted crushed-stone base, geotextile fabric beneath the base, and by using larger base rock with a smaller topcoat. For high-traffic or erosion-prone areas consider gravel stabilization products (grids or polymer binders) to lock the surface in place.

Permitting and HOA rules vary, so check with the City of Fellsmere Planning/Building Department and any HOA or neighborhood covenants before installing a gravel driveway or scheduling a large delivery. Many municipalities do not require a permit for replacing an existing driveway, but changes to impervious surface, drainage work, curb cuts, or commercial deliveries may trigger reviews. Always confirm local requirements to avoid fines or having to remove material later.

Expect regular maintenance for a gravel driveway in West Florida: light regrading and filling low spots after storms, adding topcoat gravel every 1–3 years, and periodic weed control and edging. Typical homeowner maintenance costs run roughly $100 to $400 per year depending on damage from heavy rains and how proactive you are; full replenishment (several tons) every few years is the main expense. Budget for occasional machine grading or professional help after major storms.

Natural stone and aggregate vary slightly in color, texture, and size between quarry batches. This is normal and doesn't affect performance; photos represent typical appearance.

Absolutely. You can browse our project guides, use our material quiz, or call us directly. We're happy to help you pick the right material for your project.

The minimum order is 1 ton, or 1 cubic yard for mulch and soil products. That covers a single garden bed or a short stretch of path, so small jobs are welcome alongside large ones.

Our free material calculator converts your project dimensions into the exact tons or cubic yards you need, so you order the right amount with no guesswork.