Gravel delivery in Daytona Beach, FL

A full tri-axle dump truck in the Daytona Beach area typically carries about 10 to 15 tons and delivered costs usually range from $500 to $1,200 depending on the gravel type, seasonal demand, and driveway access. Hello Gravel has a 3-ton minimum order and will give an exact delivered price for your zip code and material choice.

Coverage depends on depth and rock size, but in Daytona Beach 1 ton of gravel will generally cover about 80 to 100 square feet at a 2-inch depth. For a more precise estimate, convert area and depth to cubic yards and multiply by the material's weight (Hello Gravel’s calculator uses local densities).

Cost depends on depth and material: at 2 inches deep 1,000 sq ft requires roughly 6.2 cubic yards (about 8.5–9.0 tons). With typical local prices of $40 to $75 per ton, material-only delivery costs are roughly $340 to $675, not including site prep or spreading.

Gravel prices in Florida vary by type and region; in Daytona Beach expect roughly $40 to $75 per ton for common crushed stone and base materials. Decorative gravels or specialty mixes run higher, and delivery, seasonal demand, and storm activity can affect final pricing.

A simple way to estimate is by square foot: gravel materials usually cost about $1 to $3 per sq ft delivered. For a 20 ft long by 12 ft wide driveway (240 sq ft) expect material delivery to run about $240 to $720, with additional costs for grading, base, and compaction if needed.

Two inches is usually too thin for a driveway and will quickly settle or wash in coastal Florida conditions; we recommend 3 to 4 inches for light use and 4 to 6 inches for regular vehicle traffic. Because Daytona Beach has sandy soils and periodic heavy rain, adding a compacted base and geotextile fabric improves longevity.

Tonnage depends on width and depth. For example, a 100 ft long by 12 ft wide driveway at 3 inches deep needs about 11.1 cubic yards, which is roughly 15 to 17 tons in Daytona Beach; use the area x depth method or Hello Gravel’s material calculator for an exact number.

A 7x14 dump trailer typically carries about 3 to 6 cubic yards of gravel depending on sidewall height and how full it is. That converts to roughly 4.5 to 9 tons, depending on the material density and moisture content.

Gravel itself can last decades, but surface depth and appearance change with traffic and storms; expect to top-dress or refresh driveway gravel every 2 to 5 years in the Daytona Beach area. Heavy rains, hurricane events, and washouts can require more frequent replenishment.

Buying in bulk from a local supplier and having it delivered by a dump truck is usually the most cost-effective option. Hello Gravel connects you with local suppliers to get bulk pricing, but you can lower costs further by choosing base-grade materials instead of decorative stone and scheduling delivery outside of storm seasons.

Ten cubic yards is 270 cubic feet, which covers about 1,620 sq ft at 2 inches deep and about 1,080 sq ft at 3 inches deep. In weight terms that’s roughly 12 to 15 tons depending on material; use these figures to plan deliveries and staging for your Daytona Beach project.

A 20x20 area is 400 sq ft; at 3 inches depth you need about 3.7 cubic yards, or roughly 5 to 6 tons. With typical local material prices of $40 to $75 per ton, expect material-only delivery to cost about $200 to $450, plus any site prep or spreading fees.

Yes, many homeowners in Daytona Beach install gravel themselves; basic steps are grade and compact the subgrade, lay geotextile fabric if needed, add a compacted base layer, then spread and compact the finish gravel. For driveways or areas prone to runoff, consider hiring a pro for proper drainage and compaction to avoid washouts.

Hello Gravel arranges delivery by local dump trucks and most drivers can perform tailgate spreading at their discretion; you can request spreading at checkout but it is not guaranteed. Standard delivery is 2+ business days, with next-day options available for orders placed before noon CST for an extra fee.

Measure your area in square feet and choose the desired depth in inches, then multiply area x depth (in feet) and divide by 27 to get cubic yards; multiply cubic yards by the local tons-per-yard factor (about 1.3–1.5) for tons. You can also use Hello Gravel’s online calculator or contact our team for a quick estimate and recommended material.