Fill Dirt in Coral Springs, FL

A typical tri-axle dump truck load (roughly 10–14 cubic yards) of basic fill dirt in the Coral Springs area usually costs in the range of $200 to $600 delivered. Prices vary by supplier, moisture content, and how far the truck must travel; Hello Gravel lists transparent, local pricing at checkout and has a 3-ton minimum order. Request a quote for an exact delivered price to your Coral Springs address.

Yes — basic fill dirt is generally cheaper per cubic yard than most decorative or crushed gravels because it is lower-value material. That said, gravel performs better for driveways and surface areas, while fill dirt is intended for raising grade or backfill, so cost alone shouldn’t determine which to use.

In Florida and Coral Springs, fill dirt commonly falls between about $10 and $25 per cubic yard for the material, with delivered prices higher depending on truck fees and distance. Hello Gravel shows local supplier rates in your zip code and includes delivery options so you can see the full delivered cost before ordering.

Use this quick formula: cubic yards = square feet x depth (in inches) / 324. For 1,000 sq ft that equals about 6.2 cubic yards at 2u0022 depth, 9.3 cubic yards at 3u0022 depth, and 18.5 cubic yards at 6u0022 depth. Always order 10% extra for compaction and settlement.

Fill dirt can be used as subgrade to raise or level a driveway, but it is not a good wearing surface on its own; you should install a compacted gravel base of 4–6u0022 for a typical residential driveway. For a 100 ft long by 10 ft wide driveway at 6u0022 depth you would need about 18.5 cubic yards of material for that layer; quantity and costs depend on whether you use fill dirt under the base or gravel throughout.

One cubic yard is roughly a 3 ft by 3 ft by 3 ft cube — picture a medium-sized pile that can fit in a pickup bed. In Coral Springs, fill dirt typically weighs about 1.2 to 1.6 tons per cubic yard depending on moisture and soil type, so weight can vary significantly.

Yes, fill dirt is commonly used to raise and level yards, but proper installation matters: place fill in layers, compact each lift, and grade for drainage away from structures. Because South Florida soils are sandy and the area is flat, check for existing drainage paths and consider a thin topsoil layer before planting or sodding.

A standard full-size pickup bed usually holds about 1 cubic yard of loose material when heaped above the bed rails, but that often exceeds safe payload limits. For safety and accuracy, heavier loads should be delivered by dump truck; Hello Gravel’s minimum order is 3 tons and most customers use professional delivery.

Not recommended. Fill dirt lacks organics and nutrients needed for sod to root and thrive; you should add a layer of quality topsoil or amend the fill before laying sod. Also ensure the finished grade allows for proper drainage and that the fill has been compacted to prevent future settling.

Plan to order 10–20% more material than calculated to cover compaction, settlement, and minor measurement errors. For deeper fills or highly variable sites you may need more; when in doubt, get a small delivery first or ask Hello Gravel’s team for help estimating quantities for Coral Springs conditions.

Two inches of fill dirt is usually only sufficient for light grading or filling small depressions, not for a driveway base. For driveways, aim for 4–6 inches of compacted base material (gravel) on top of a stable subgrade; if you need to raise the subgrade, spread and compact fill in several thinner lifts rather than one 2u0022 layer.

Buying bulk through a local supplier and delivered by dump truck is usually the most cost-effective option; Hello Gravel connects you with local suppliers and shows delivered pricing so you can compare. Reusing onsite material when possible can save money, but always follow city rules about importing fill and consider hauling distances, as long trips increase cost.