Gravel delivery in Clearwater, FL

A dump truck load varies by truck and material, but a common tri-axle delivery holds about 10-12 cubic yards (roughly 14-17 tons for typical gravel). Hello Gravel has a minimum order of 3 tons, and final pricing depends on the gravel type and your zip code in Clearwater. For an exact delivered price, use our site to get a quote or contact our team to check local supplier rates.

Amount depends on depth: at 1 inch thickness you would need about 3.1 cubic yards (about 4.3 tons), and at 2 inches about 6.2 cubic yards (about 8.6 tons). For walkways you might use 1-2 inches; for driveways plan on 3-6 inches. Use our material calculator or contact Hello Gravel with your project depth for a precise estimate and delivery options in Clearwater.

Ordering by the ton or cubic yard in bulk and choosing locally sourced material usually gives the best price. Recycled options like crushed concrete or local crusher run often cost less than decorative pea gravel or river rock. Check Hello Gravel quotes for local suppliers and compare delivery fees and minimums before you buy.

You can for short-term paths, but for long-term use you should prepare the base: remove organic topsoil where needed, level and compact the subgrade, and consider a geotextile fabric to reduce mixing with native sand and weeds. Clearwater's sandy soils and heavy rains make proper compaction and drainage especially important to prevent rutting and washout. If you plan a driveway or heavy traffic area, build a compacted base of crushed stone before adding the finish gravel.

Cost depends on width, depth, gravel type, and local delivery. As an example, a 100 ft long by 10 ft wide driveway (1,000 sq ft) at a 4 inch compacted depth needs roughly 12.3 cubic yards (about 17 tons); material and delivery might range widely, so expect several hundred to over a thousand dollars for material alone. Contact Hello Gravel for a site-specific quote and to factor in spreading, compaction, and local supply in Clearwater.

No, 2 inches is typically too thin for a driveway, especially in Clearwater where sandy subsoils and stormwater can cause shifting. We recommend a compacted base layer of 4 to 6 inches of crushed stone or crusher run for residential driveways, plus a 1-2 inch wearing course if desired. Thicker, well-compacted base improves load-bearing and reduces maintenance in our coastal climate.

Coverage depends on depth: 1 ton will cover about 230 sq ft at 1 inch thick, about 115 sq ft at 2 inches, and about 77 sq ft at 3 inches (density varies by material). In Clearwater, lighter shell mixes or denser crushed stone will change those numbers slightly, so use the values as a general guide. For accuracy, use our calculator or ask Hello Gravel for a localized coverage estimate.

A 20x20 patio is 400 sq ft; at a 4 inch compacted depth you would need about 4.9 cubic yards (around 7 tons) of base material. Material-only costs vary by type, but expect the delivered gravel portion to range from a few hundred dollars upward; labor, compaction, and any geotextile add to the total. Get a detailed Hello Gravel quote for your Clearwater address to see exact pricing and delivery timing.

Locally sourced crusher run or recycled crushed concrete is often the least expensive option for driveways because it uses mixed sizes and fines that compact well. In the Clearwater area, locally available limestone-based products and crusher run are commonly cheaper than decorative pea gravel or washed river rock. Ask Hello Gravel about local recycled options and availability for the best price in your zip code.

A mix is best: a base layer of crusher run or 3/4u0022 minus crushed stone compacts well, and a top wearing layer of 3/8u0022 to 3/4u0022 crushed stone provides a stable surface. Finer particles and small angular rock lock together, which helps compensate for Clearwater's sandy subsoil and heavy rains. For decorative finishes, pea gravel is attractive but may require edging and more maintenance.

Yes for driveways and heavy-use areas you should remove topsoil, create a uniform subgrade, and install a compacted base of crushed stone. For small paths or garden beds you might only need to remove grass and level the area, then lay fabric and gravel. Given Clearwater's coastal soils and rainfall, proper subgrade prep and compaction reduce settling and erosion over time.

A 10 cubic yard load contains about 10 cubic yards of material; depending on the material density that works out to roughly 14 to 17 tons for typical crushed stone and gravel. Exact weight varies by material type (pea gravel, crushed stone, shells) and moisture content, so use tons or cubic yards consistently when ordering. Hello Gravel shows local supplier units and can help convert between cubic yards and tons for your Clearwater order.