Fill Dirt delivery in Anthony, FL

Fill dirt is native soil with little organic matter used to raise or level ground, fill holes, and build up grades under driveways or patios. In Anthony, FL, homeowners use it for yard grading, filling low spots after storms, and preparing a base for hardscapes where good drainage and compaction are needed.

Prices vary by supplier, delivery distance, and material quality, but in Florida fill dirt commonly sells by the cubic yard and often falls in a modest price range compared with topsoil. Hello Gravel requires a minimum order of 3 tons and will show local supplier pricing and delivery fees during checkout—get a quote for an accurate, location-specific price.

Cost depends on truck size, load volume, and distance; a standard tri-axle dump truck commonly used in our network carries about 10–12 cubic yards. For a precise total, request a Hello Gravel quote—our checkout shows material cost plus delivery and any next-day fees if requested.

One cubic yard equals 27 cubic feet and covers about 324 sq ft at 1 inch depth, 162 sq ft at 2 inches, and 81 sq ft at 4 inches. Use those figures to estimate how many cubic yards you need based on the depth you plan to add.

Weight varies with moisture and soil type, but fill dirt generally weighs around 1.0–1.4 tons per cubic yard. Because weight affects trucking and pricing, Hello Gravel lists materials by cubic yards and shows weight-based details on the quote when available.

Yes, fill dirt is typically cheaper than topsoil because it has little organic matter and is used for structural fill rather than planting. If you plan to grow grass or plants, budget for a topping layer of quality topsoil or compost after placing fill dirt.

Not by itself—fill dirt lacks nutrients and organic matter needed for healthy plants. For lawns and gardens in Anthony, place several inches of topsoil or a topsoil/compost mix over the fill dirt before planting.

For small spot fills, add material in 2–4 inch lifts and compact each layer; larger fill areas or loads over 6 inches should be built in controlled lifts with compaction and may need professional guidance. For structural work like raising a driveway or building pads, consult an engineer or contractor to determine required depth and compaction.

A tri-axle truck carrying about 10 cubic yards will cover roughly 810 sq ft at 4 inches depth (10 yd x 81 sq ft per yd at 4 inches). Exact coverage depends on the truck's load size and how much the material settles after placement.

Compare local supplier quotes and delivery fees—ordering through Hello Gravel lets you see local pricing, schedule delivery, and avoid separate hauling arrangements. Sometimes contractors or nearby construction projects offer clean fill, but verify quality and permits before accepting.

Clear the dump area, mark the preferred drop spot, remove low branches, and make sure truck access is on stable ground. Call 811 before digging, note any driveway or yard restrictions in Order Notes, and request tailgate spreading at checkout if you want the driver to consider spreading (drivers do it at their discretion).