Fill Dirt delivery in Houston, DE

Prices vary by supplier and availability, but expect delivered fill-dirt in Houston, DE to run roughly $12 to $40 per ton (or about $15 to $45 per cubic yard) including standard delivery. Hello Gravel has a 3-ton minimum order and offers clear pricing—get an exact delivered price by entering your zip code or requesting a quote through our site. Local factors like haul distance, material type (clean structural fill vs. topsoil), and truck access can change the final price.

A tri-axle dump truck commonly used in our network carries about 10 to 14 cubic yards loose, which is roughly 12 to 18 tons for fill-dirt depending on moisture and compaction. For coverage, a truckload at 12 cubic yards will cover about 324 sq ft at 4 inches deep; always calculate needed volume by multiplying length x width x depth, then divide cubic feet by 27 for cubic yards and convert to tons using 1.2–1.4 tons per cubic yard.

Fill-dirt is usually the least expensive material per ton, but it is not the best surface for driveways because it doesn't drain or compact like crushed stone. For an economical driveway that lasts, crushed stone or crusher-run is a better value despite a higher per-ton cost because it compacts and sheds water. We recommend getting quotes for both materials through Hello Gravel to compare delivered costs for your exact location and driveway size.

You can place fill-dirt over existing dirt to raise grade, but fill-dirt alone is not a long-term erosion-control surface—especially in Delaware's wet winters and storm events. To prevent washing, compact the fill, build proper slopes, and protect exposed areas with seed, erosion blanket, or a layer of crushed stone. For driveways and pads, use a compactable base material under any surface layer to reduce erosion risk.

For durable driveways in Houston, DE, install 4 to 6 inches of crushed stone or crusher-run over a geotextile fabric, compacted in lifts, before adding any top material. Fill-dirt is appropriate for raising low spots but not as structural base—use it for grading behind the compacted stone, not as the primary base. Proper drainage (crown and edge grading) combined with compacted crushed stone gives the best longevity in local conditions.

A 20x20 area at 4 inches deep needs about 4.9 cubic yards, roughly 6 to 8 tons of fill-dirt depending on moisture and compaction. Based on local delivered rates, material and delivery might range from about $80 to $320; differences come from whether you choose plain fill-dirt, screened fill, or structural fill and from delivery distance. For precise pricing, use Hello Gravel's online quote tool with your zip code and select the fill-dirt option.

A simple way: compute area x depth to get cubic feet, divide by 27 to get cubic yards, then multiply by 1.2–1.4 to estimate tons. As a rule of thumb, one ton of fill-dirt covers about 80 to 100 sq ft at 2 inches of depth or roughly 35 to 45 sq ft at 4 inches. A 50 lb bag is tiny for bulk fill (there are 40 bags per ton), so bags are usually for topsoil or potting use, not large fill projects.

Fill-dirt alone will not behave like concrete—it compacts but remains susceptible to settling and erosion. A more economical alternative is compacted crusher-run or stone dust over geotextile, which gives a firm, semi-rigid base suitable for small patios or shed pads without full concrete. For a load-bearing or finished patio surface, consider pavers on a compacted stone base rather than relying on fill-dirt.

Occasionally free or low-cost fill-dirt is available from local construction sites, municipal projects, or neighbors clearing land, but watch for contamination (trash, organics, construction debris) and required permits. Hello Gravel can arrange delivery only from our vetted supplier network—if a local supplier has low-cost or free material and agrees to sell/deliver it, we may be able to coordinate haul; contact our team with details and your zip code to check availability. Always test or inspect unknown material before spreading it on your property.

For compaction and stability in Delaware's climate choose a clean, well-graded structural fill or dense graded aggregate rather than organic topsoil or loose loam—the former compacts tightly and drains better. Hello Gravel connects you with local suppliers who deliver these material types, but we do not guarantee installation; tailgate spreading is sometimes available at the driver's discretion and should be requested at checkout. For best results, specify 'structural fill' or 'crusher-run' when ordering and plan for mechanical compaction on site.