Gravel delivery in Peyton, CO

Coverage varies by gravel type and depth. Using a common assumption (1 ton ≈ 0.75 cubic yards), 1 ton covers about 100–125 sq ft at 2u0022 depth, 65–85 sq ft at 3u0022 depth, and 50–60 sq ft at 4u0022 depth. For driveways plan on a 10%–15% overage for compaction and waste, and remember Hello Gravel minimum orders start at 3 tons.

Many full-size pickups can carry roughly 1 ton (payload varies by model), so a single ton is often movable, but it can be hard on suspension and bed and may require tarping and securing. For convenience, safety, and larger jobs, delivery is recommended—Hello Gravel coordinates dump-truck delivery and our minimum order is 3 tons in most areas.

Prices vary by supplier and season, but expect roughly $50–$120 per ton delivered for pea gravel in the Peyton area when small-load fees are included. Exact pricing depends on material type, truck availability, and whether your address needs special access; request a quote for an exact delivered price.

A typical tri-axle dump truck carries about 10–14 tons (roughly 7–10 cubic yards). That load can cover roughly 700–1,400 sq ft depending on final depth (2u0022–4u0022). Delivered price for a full truck varies widely by material and distance but commonly ranges from a few hundred to over a thousand dollars; ask for a local quote for exact figures.

Costs depend on length and prep—assume a 20-foot-wide by 50-foot-long driveway (1,000 sq ft) as an example. At a 3u0022 top depth you would need about 10–12 tons of gravel; materials and delivery might run $600–$1,500, and labor/site prep $1,000–$4,000 depending on grading, removal, and compaction. For an accurate estimate, get a site-specific quote including any grading or drainage work needed for Peyton's freeze-thaw conditions.

A 7x14 dump trailer usually holds about 4–7 cubic yards depending on side height (1.5–2.0 ft sides). Renting a trailer can be economical for very small DIY loads under about 3 tons, but for larger jobs or when you need 3+ tons, delivery from Hello Gravel is usually easier and often cheaper once you factor in time, towing, and multiple trips.

A single pickup-load (roughly 1 ton or less) from local suppliers is often priced between $50 and $150 depending on material and whether the supplier drops it or you pick it up. Many suppliers price by the ton or cubic yard, so check payload limits and delivery fees before assuming a flat pickup price.

Conversion depends on material density, but a common rule is 1 ton ≈ 0.75 cubic yards, so 20 tons is roughly 15 cubic yards (typical range 12–18 cubic yards). Delivered cost for 20 tons in Peyton can vary widely by material but often falls between $800 and $2,400; request a local Hello Gravel quote for a precise delivered price.

Two inches is only a thin top layer and is generally insufficient for a driveway that will see regular vehicle traffic or snow-plow use in Peyton's climate. For durability, plan on a built-up section: a 4–6u0022 compacted base of road base or crushed aggregate plus a 2–3u0022 finished gravel layer. Proper depth and a stable base reduce rutting and drainage problems in the local freeze-thaw environment.

Cheapest options are usually pit-run, road base, or recycled aggregate, which perform well as a structural base but are less attractive as a finished surface. They can be a durable long-term base if topped with a finer decorative gravel or compacted, but they may require more maintenance and dust control than decorative gravels. For the best balance of cost and longevity, consider a road-base base layer with a thin topcoat of decorative gravel.

Use a material calculator or provide project dimensions (length, width, desired depth) to get an accurate tons or cubic yards estimate; factor in 10%–15% overage for compaction and waste. Then check your zip code on Hello Gravel, request a quote, or call our team—we'll pair you with local suppliers and provide a delivered price for the specific gravel type and timing you need.