Fill Dirt in Glenwood Springs, CO

Delivered fill-dirt prices in Glenwood Springs commonly range depending on source and haul distance; expect roughly $15 to $45 per ton delivered, with variability for rock content, moisture, and access. Hello Gravel requires a minimum order of 3 tons, and some local suppliers or difficult-access deliveries may add a trip or access surcharge. Check your ZIP code and delivery options during checkout for an exact price and any waived delivery fees.

Calculate area in square feet, multiply by desired depth in inches, then divide by 324 to get cubic yards (area * depth / 324 = yd3). Convert cubic yards to tons by multiplying by 1.1 to 1.4 to account for dirt density and moisture — for example, 1,000 ft² at 6 inches is about 18.5 yd³ which is roughly 20–26 tons. Because mountain soils settle and compact differently, we recommend ordering 5–10% extra and confirming final quantities with your contractor.

Yes—Glenwood Springs sees freeze-thaw cycles and spring runoff that can cause settling and frost heave if fill-dirt is not placed and drained properly. Use well-compacted lifts, good site drainage, and where needed, geotextile separation or engineered fill under structures to reduce movement. For critical grades near foundations or roads, consider engineered base materials or professional geotechnical guidance.

For general yard raising and backfill, a well-graded fill-dirt with a moderate fines content (loam-free topsoil removed) is fine for landscaping. For driveways and access roads you should use structural fill that compacts well and then cap with crushed rock or engineered base; pure fill-dirt alone is not a durable wearing surface. Local suppliers vary, so ask for a gradation or description and state your intended use when ordering.

For structural work, contractors typically aim for 90–95% of the maximum dry density measured by a Standard Proctor test; homeowners doing non-structural fills may accept lower compaction. Proper compaction is done in 6–8 inch lifts with appropriate equipment; ask your contractor whether compaction is included in their bid. Always request documentation or a compaction report for retaining walls, pads, or near foundations.

Fill-dirt is best for raising grade and backfill but is not a good wearing surface for driveways. Recycled asphalt and crushed rock provide much better surface stability and drainage for driveways, while engineered base (compacted, graded aggregate) gives the highest load-bearing performance and frost resistance. Given Glenwood Springs’ freeze-thaw cycles and drainage, use engineered base or crushed rock as the finished driveway surface over compacted fill-dirt.

Possibly—grading, fill, and work near riparian areas or the Colorado River corridor in Glenwood Springs often require review or permits from the City of Glenwood Springs and possibly Garfield County or state agencies. Rules vary by project scope, amount of material, and proximity to waterways or floodplains, so check with the Glenwood Springs Building and Planning Department before ordering large loads. If you plan big grade changes or work near a creek, we recommend getting guidance from local planning staff first.

Hello Gravel commonly uses tri-axle dump trucks for deliveries, but local haulers may offer smaller end-dumps, 4x4 trucks, or belly-dump options for tighter, steeper sites. Drivers can sometimes perform tailgate spreading at their discretion, but it is not guaranteed and difficult-access deliveries often incur an extra fee. When ordering, upload site photos and notes about steep grades or narrow entrances so your supplier can quote the right truck and any access surcharges.

Expect settlement and some regrading during the first year after placement as fill consolidates; light regrading and adding fines or additional top material is common. For driveways, a compacted fill base topped with crushed rock will need periodic grading, especially after spring thaw and heavy runoff events. Regular drainage maintenance and timely repairs after freeze-thaw cycles will extend the useful life of the fill and surface materials.

Yes, many local suppliers in West Colorado can create custom blends of fill-dirt, sand, or clay to achieve better compaction or drainage; blends are commonly used to meet site-specific needs. Added costs depend on the components and mix rate, typically adding a few dollars per ton, so request a quote for the exact blend you need. Ask suppliers for a description or gradation and whether the blend is appropriate for your elevation, moisture conditions, and intended use.