Gravel delivery in Selma, CA

A full tri-axle dump truck in the Selma area typically carries about 8-12 cubic yards (roughly 10-12 tons) of gravel. Delivered prices in Fresno County vary by material and distance, but expect roughly $40-$70 per ton or $50-$100 per cubic yard as a typical range; a full truckload will therefore often cost several hundred dollars to over $1,000 depending on material and local availability. Hello Gravel requires a 3-ton minimum order and shows all delivery charges up front, so the fastest way to get an exact delivered price for your zip code is to request a quote on our site.

One cubic yard equals 27 cubic feet and will cover about 162 sq ft at 2u0022 depth and about 81 sq ft at 4u0022 depth. Because gravel density varies, one ton typically equals about 0.8 to 1.2 cubic yards; using 1 ton ≈ 0.83 yd3, one ton will cover about 135 sq ft at 2u0022 and about 67 sq ft at 4u0022. Use these numbers as estimates and get a site-specific recommendation for compacted vs loose coverage.

For most Selma homeowners, bulk delivery is the most cost-effective option once you need multiple tons: delivered bulk has a much lower per-ton price than bagged gravel. Picking up from a local supplier can save money if you have a truck or trailer and the supplier permits small loads, but Hello Gravel has a 3-ton minimum for delivery which helps keep per-ton costs low. Buying bagged gravel is convenient for tiny jobs but is significantly more expensive per ton and is generally not the cheapest option for driveway or large landscape projects.

Typical delivered price ranges in the Selma/Fresno area are roughly: 3/4u0022 crushed rock $40-$70 per ton, crushed base rock $35-$65 per ton, and pea gravel $50-$80 per ton. Per cubic yard equivalents commonly fall between $50 and $110 per cubic yard depending on density and material. Prices fluctuate with local quarry supply and truck distance, so request a local quote via Hello Gravel for exact pricing and material options.

Two inches of gravel is usually too thin for a driveway in Selma, especially on clay or poorly drained soils; it may shift, rut, and wash out under vehicle traffic. We generally recommend a compacted base of 4-6 inches of larger crushed rock for load-bearing, plus a 1-3 inch top course of finer gravel for a finished surface, so plan for 5-8 inches total in many cases. Local soil and drainage conditions in Fresno County can change that recommendation, so check site specifics before ordering.

A 20x20 driveway is 400 sq ft. At a recommended 3u0022 top course over a base you might need roughly 3.7 cubic yards (about 4.5 tons) for the surface layer; a full truck (8-12 yd3) will be more than enough and could supply the base as well. Delivery costs to Selma vary, but many local orders qualify for free or low-cost delivery—typical third-party delivery fees in the region often range from $50 to a few hundred dollars depending on distance and load size, so check Hello Gravel for an exact delivered price.

Yes, many Selma homeowners install gravel themselves and save on labor costs; DIY can cut total project cost substantially if you can handle grading and compaction. Typical equipment rentals: plate compactor or roller $50-$150/day and a small skid steer or truck rental $150-$350/day; hiring local labor for grading and compaction might cost several hundred dollars. Factor in time, physical effort, and needed site prep (drainage, edging, and base) when comparing DIY vs hiring professionals.

For driveways in Selma, an angular crushed rock (commonly called 3/4u0022 crushed or 3/4u0022 minus) is a cost-effective, long-lasting choice because the angular pieces lock together and compact well. Use larger, crushed rock (1-1.5u0022) for a compacted base and a 3/8u0022 to 3/4u0022 crushed top course for the finished surface; avoid smooth pea gravel for primary driveway surfaces because it moves under tires. Local suppliers often carry regionally sourced crushed rock that performs well in Fresno County climates—ask Hello Gravel for the best local match.

A well-built gravel driveway in Selma can last decades with routine maintenance; expect to add a top dressing of 1/2 to 1 inch every 2-5 years and periodic regrading after heavy rains. Using angular crushed rock and installing a proper compacted base and drainage reduces ongoing maintenance and material loss, lowering lifetime cost compared with using rounded or pea gravel. Long-term expenses depend mostly on traffic, drainage, and initial construction quality, so investing in the right base and material upfront usually pays off.

Many local suppliers in the Selma/Fresno area can accommodate smaller loads or trailer deliveries, but availability varies by supplier and material. Smaller loads and bagged materials usually cost more per ton because of handling and logistics, and some suppliers set minimums; Hello Gravel lists a 3-ton minimum for delivery through our platform, so check with us or individual yards if you need a smaller quantity. For the best per-ton price, bulk full-truck deliveries are typically the most economical option.