Fill Dirt delivery in Meridian, CA

Prices vary by supplier and season, but expect a delivered range of about $12 to $30 per ton in the Meridian area. Hello Gravel has a 3-ton minimum and standard delivery is 2+ business days; next-day delivery may be available for orders placed before noon CST for an extra fee. Exact price depends on local supply, screening, truck access, and whether you need spreading, so check your zip code for a personalized quote.

Use this formula: volume (cu yd) = area (sq ft) x depth (ft) / 27. For example, raising 1,000 sq ft by 6 inches (0.5 ft) needs about 18.5 cubic yards, which converts to roughly 22 to 30 tons depending on moisture and compaction (use 1.2 to 1.6 tons per cubic yard as a rule of thumb). Always order 5-10% extra to allow for compaction and grading.

No — fill dirt is intended for raising grade and backfill, not as a finished driveway surface. For driveways and high-traffic areas, crushed rock or engineered road base provide better drainage, compaction, and long-term durability. If you must use fill dirt as underlayment, place and compact it properly, then finish with a suitable surface material.

Fill dirt can work well in West California, but local performance depends on its composition and site drainage. Clay-heavy fill can hold moisture and shift in wet seasons, while sandy or well-graded mixes drain better. Ask suppliers about screening and local soil types, and design for proper slope and drainage around your property.

Compact in 4- to 6-inch lifts, controlling moisture so the soil reaches optimal compaction. For small areas use a plate compactor, for trenches a jumping jack (rammer), and for larger areas use a vibratory roller or sheepsfoot roller. A compaction specification (like 90% to 95% of standard proctor) is common for structural work; hire a contractor for larger or load-bearing projects to ensure proper results.

Local rules vary, but minor backyard grading often needs no permit while larger grading, changes to drainage, or retaining walls may require permits from the city or county. California also has stormwater and erosion control requirements for construction sites, so check Meridian/County building and planning departments and your HOA before starting work. When in doubt, contact local authorities or Hello Gravel’s support for guidance before ordering.

Hello Gravel connects you with trusted local suppliers in the Meridian area who commonly offer screened fill dirt; availability depends on local quarries and seasonal demand. Standard delivery lead time is 2+ business days; next-day may be possible for orders placed early. For large or special screened material orders, allow extra lead time and confirm truck access and staging at the delivery site.

If used as a surface, fill dirt will erode and settle and may need topping within 1 to 3 years depending on traffic, drainage, and weather. When properly compacted and used as a subgrade beneath a finished surface (gravel, asphalt, concrete), fill dirt can perform for many years as part of the base, with the wearing surface determining maintenance intervals. The key is proper drainage, compaction, and using the right finish material for the intended use.

Installed costs vary by job complexity, but expect combined material, delivery, placement, and compaction to commonly fall between $40 and $120 per cubic yard for small residential projects in the area. Simpler projects with easy access and basic grading trend toward the low end, while tight access, hauling distance, or earthmoving equipment needs push costs higher. Get written quotes from local contractors and factor in permits, disposal of excavated material, and any drainage work.

Engineered road base is usually more durable and cost-effective long term for driveways and paths because it is designed to compact well and shed water. Fill dirt is cheaper per ton and useful for raising grade or backfill, but it does not provide the structural strength or drainage of road base. For driveways choose engineered materials for the surface or base and use fill dirt only for nonstructural fill or to build up low areas before installing an engineered base.