Gravel delivery in Big Pine, CA

Suppliers commonly offer sizes like 3/8u0022, 1/4u0022 pea gravel, 3/8u0022-3/4u0022 crushed stone (including #57), crusher-run (or Class 5), and decomposed granite. For driveways in Big Pine, a compactable base such as crusher-run/Class 5 is recommended, with a 3/4u0022 crushed surface or decomposed granite on top for a stable finish. Availability can vary locally due to regional sourcing, so check product names and photos when ordering.

One cubic yard (27 cubic feet) covers about 162 sq ft at 2u0022 depth, 81 sq ft at 4u0022 depth, and 54 sq ft at 6u0022 depth. Use these numbers to estimate needs for driveways and paths, and add 5-10% for compaction and waste. For Big Pine projects, round up to the nearest whole cubic yard since minimum orders are typically 3 tons.

No — 2 inches of loose gravel alone is generally not sufficient for a durable driveway in Big Pine. We recommend a compactable base (crusher-run/Class 5) of 4-6u0022 and then 1-2u0022 of a surface layer like 3/4u0022 crushed stone or decomposed granite, especially given seasonal freeze-thaw and runoff in the Eastern Sierra area.

Crusher-run (Class 5) and base mixes are the most cost-effective for driveway subbase because they compact well and limit movement. For a surface, crushed stone or decomposed granite balances cost and performance; pea gravel and river rock are less suitable for drive lanes because they shift and roll. Local suppliers in the Big Pine area often stock these cost-effective base and surface options.

Class 5 (or crusher-run) is a mix of crushed rock and fines designed to compact into a stable base. Use it as the subbase for driveways, parking pads, and under pavers in Big Pine to provide drainage and load-bearing support. A typical installation is 4-6u0022 of Class 5 compacted before placing a finished surface.

Costs vary, but a rough range for a single-lane 20' long by 10' wide driveway (200 sq ft) is $400 to $1,100. Material costs for a compacted base plus surface usually run $40-$80 per ton, delivery to remote Big Pine addresses can add $50-$200, and basic labor for spreading and compacting often adds $200-$600. Exact pricing depends on material choice, required depth, access, and whether local contractors are needed for compaction.

Possibly — Big Pine is in Inyo County, and local rules or HOA covenants can affect driveway placement, drainage, and setbacks. Before starting work, check Inyo County planning or your HOA for any permits, easement rules, or stormwater requirements. When in doubt, call the county planning office or your HOA for guidance.

Hello Gravel’s minimum order nationwide is 3 tons, which is common among local suppliers. Delivery is by dump truck (usually tri-axle) and standard delivery is 2+ business days; next-day delivery is sometimes available with an extra fee if ordered by the cutoff. Remote locations like Big Pine may incur additional delivery charges and longer lead times—ask for a site-specific quote.

Plan on light maintenance each year—raking and filling low spots—and a regrade or top-up of surface material every 1-3 years depending on traffic, drainage, and winter conditions. Heavy use areas or spots with poor drainage may need more frequent attention. Regularly clearing runoff channels and re-compacting low areas will extend the life of the driveway in Big Pine’s mountain climate.

Suppliers need your exact address and zip code, driveway length and width, desired finished depth, preferred material type, and whether truck access is clear for a tri-axle dump. Also share photos of the site, gate codes or access restrictions, delivery date preferences, and whether you want tailgate spreading (not guaranteed). This helps suppliers estimate tonnage, truck size, and any extra fees for remote delivery to Big Pine.