Fill Dirt delivery in Auburn, CA

Delivered price for fill dirt in Auburn typically depends on supplier distance, order size, and site access. Expect a general range of about $15 to $45 per cubic yard delivered, though exact quotes vary by supplier and may be higher for small orders or difficult access. Use our checkout or Get a Quote to see prices for your zip code and specific site.

Use the formula: cubic yards = (area in square feet x depth in inches) / 324. For example, to raise 1,000 sq ft by 3 inches you need about (1,000 x 3) / 324 = 9.26 cubic yards, so order a bit extra for compaction and settling. If you want help, use Hello Gravel's material calculator or contact our team.

One cubic yard equals 27 cubic feet and covers about 324 sq ft at 1 inch depth, 162 sq ft at 2 inches, and 54 sq ft at 6 inches. These are theoretical coverage figures; expect to order 5-15% more to allow for compaction, uneven ground, and waste. For precise planning, measure the site contours and add a contingency.

Hello Gravel typically uses tri-axle dump trucks that deliver roughly 8 to 12 cubic yards loose, depending on local load limits and material density; larger trucks can carry more where permitted. A single truckload of fill dirt in Auburn commonly runs between about $150 and $500 all-in, depending on yardage, distance, and site access. For an exact per-load cost, request a quote for your address and desired amount.

Fill dirt is usually more cost-effective when you just need to raise grade because it is cheaper per cubic yard and compacts reasonably well for non-traffic areas. For driveway bases, crushed rock or gravel is the better choice because it provides drainage and structural support; using fill dirt alone under a driveway can lead to rutting and poor drainage. In many drive projects you will use fill dirt to level low spots, then cap with a compacted crushed rock base before surfacing.

Hello Gravel's minimum order is 3 tons, which is roughly 1 to 2 cubic yards depending on moisture and soil density, and regional suppliers may have different minimums. Small-load availability varies by supplier and delivery rules, so check your zip code in our system or contact our team to see if 1-yard deliveries are possible in your area. Keep in mind small deliveries often carry higher per-yard delivery fees.

Drivers may be able to perform tailgate spreading at their discretion if requested at checkout, but Hello Gravel does not guarantee spreading or compaction services. Professional spreading and compaction are usually billed separately by contractors; as a rough guide, labor for spreading and compacting can range widely, commonly $0.50 to $2.00 per square foot depending on project size and site difficulty, plus material costs. We can help connect you to local contractors if you need full installation quotes.

Most fill dirt is low in organic matter and not suitable for establishing grass or delicate plants by itself. For planting or lawns in Auburn's climate you should cap fill dirt with several inches of topsoil or planting mix to provide nutrients and good drainage. If you only need to raise grade and then plant, order both fill dirt for bulk elevation and topsoil for the planting surface.

Fill dirt is not recommended for drainage trenches or French drain backfill because it tends to retain water and can reduce drain performance. For reliable drainage use clean crushed rock or washed gravel as specified for French drains; rock promotes flow and reduces clogging. You can use fill dirt away from the drain structure for grading, but the immediate backfill around the pipe should be drainage rock.

Costs vary by length, material depth, and site access, but you can estimate material needs and prices to get a ballpark. For example, a 20-foot-wide, 100-foot-long driveway (2,000 sq ft) with a 4-inch fill-dirt subbase uses about 25 cubic yards, and a 3-inch gravel surface uses about 18 cubic yards. Material-only costs in Auburn might run roughly $1.50 to $4.00 per sq ft depending on material choices and delivery; with spreading, compaction, and labor expect total installed costs to commonly range from $4 to $10 per sq ft. Get a specific quote from Hello Gravel and local contractors for an accurate project price.