Gravel in Benton, AR

Local gravel prices in Benton commonly range by material: crushed stone often runs about $25-$45 per ton, pea gravel $30-$60 per ton, and bank run or bulk fill can be on the lower end. A rough conversion is 1 cubic yard ≈ 1.3 tons, so multiply the per-ton price by about 1.3 to estimate per-cubic-yard cost. Prices vary by supplier, season, and delivery distance, so get a quote for an exact price.

West Arkansas suppliers commonly offer crushed stone (¾u0022 to 1u0022), pea gravel, limestone screenings, and bank-run gravel. For driveways, crushed limestone or crushed stone is usually best for strength and compaction; for patios and decorative areas, pea gravel or screened limestone gives a smoother look. Regional color and texture vary, so request local photos or samples when ordering.

Permit and HOA rules can vary by neighborhood and project scope; Benton generally requires permits when changing curb cuts, altering stormwater flow, or widening a driveway, while simple resurfacing often needs no city permit. Many HOAs in Saline County set material and appearance rules that can restrict gravel driveways. Before starting, check Benton City Planning, Saline County offices, and your HOA covenants to confirm requirements.

Benton's clay soils hold water and become sticky when wet, so you should allow for a thicker, well-draining base compared with sandy soils. Typical recommendations are a compacted sub-base of 4-8 inches of crushed stone plus a 2-3 inch wearing layer, and increase depths (6-12 inches total) on poorly draining or low spots. Add drainage features like a crowned profile, French drains, or perimeter swales to move water away and improve longevity.

Hello Gravel's minimum order is 3 tons and standard delivery is 2+ business days, with next-day delivery available for orders placed before noon CST for an extra fee. Many local suppliers offer free delivery on larger orders, while small loads or long hauls often incur fees that typically range from $0 to about $150 depending on distance and access. Same-day delivery is sometimes possible for an additional charge; ask for availability when you place your order.

Use this rule: cubic yards = (area in sq ft × depth in inches) / 324, and estimate tons = cubic yards × 1.3. Examples using local compaction guidance: a single-car driveway (12' × 50', 8u0022 compacted total) needs about 19 tons; a 2-car driveway (20' × 50', 8u0022 total) needs about 32 tons; a 1,000 sq ft patio (6u0022 total compacted) needs about 24 tons. These examples assume a compacted base plus wearing layer; adjust depths for poor drainage or heavier loads.

Yes. Benton sees heavy rainfall periods in spring and late fall that saturate clay soils and make compaction ineffective, so avoid installing base materials on fully saturated ground. Late spring through early fall (drier months) are typically best for consistent compaction and spreading. If you must work in wet periods, plan extra grading, drainage, and drying time.

Many Benton contractors use geotextile fabric under gravel where soil is clay or drainage is a concern because it helps separate the subgrade from the aggregate, reduces mixing, and slows rutting. Fabric adds cost but can extend the life of the surface and reduce maintenance; installed costs commonly range from about $0.60 to $1.25 per sq ft depending on material and labor. For driveways over soft spots or on reclaimed land, fabric is often a good investment—ask your contractor for a site-specific recommendation.

Equipment rental prices could be roughly $50-$100/day for a plate compactor and $200-$400/day for a small skid-steer or mini-excavator, while contractors bundle labor and equipment into a project price. Typical contractor-installed gravel driveway pricing in the region often falls in a broad range around $1.50-$4.50 per sq ft depending on base depth, site prep, and access; material plus delivery is commonly quoted by the ton (materials $25-$60/ton plus delivery). Always get multiple written estimates that list base depth, material type, compaction, drainage work, and any warranties.

Some local quarries and aggregate suppliers partner with contractors to offer installation and maintenance services, but offerings vary by supplier and job size. Warranties and maintenance plans are not universal—some contractors offer short-term workmanship guarantees or periodic maintenance packages such as yearly grading and replenishment. When ordering through Hello Gravel, ask our sales team to check supplier services and get any service terms in writing before work begins.