Fill Dirt in wausau, FL

Delivered price for fill dirt in the Wausau/West Florida area varies with supplier, season, and minimum order size. Expect a rough range of about $12 to $28 per ton for typical unscreened fill dirt, with small-load delivery fees often adding $50 to $150 for orders under 5 tons; Hello Gravel minimum order is 3 tons. For an exact delivered price to your property, check your zip code on Hello Gravel or request a quote.

Wausau is a small town, so most aggregate yards serving the area are located elsewhere in West Florida; many local suppliers and haulers do serve Wausau. Screened and blended mixes (fill dirt with fines or sand) are commonly available from regional yards, but availability varies by supplier—ask Hello Gravel to request screened material or a blended mix when you order. We can show local supplier options and note whether screened product is offered.

Use a practical conversion: fill dirt typically weighs about 2,200 to 2,700 lb per cubic yard (roughly 1.1 to 1.35 tons per cubic yard). For estimating on most landscaping and leveling jobs in Wausau, a good rule is 1 cubic yard = 1.2 tons. Always round up for compaction and settling and use Hello Gravel's calculator or contact our team for a customized estimate.

Wausau's wet season and a generally high water table can slow compaction, increase settlement, and reduce load-bearing capacity if fill dirt contains fines or organic material. Proper moisture control, staging work in drier months when possible, and using engineered fill or adding drainage layers will reduce post-placement settlement. Contractors in the area commonly compact in lifts and sometimes add gravel or drainage rock under pads to improve performance.

In Wausau, fill dirt is most often used for grading, bringing grades to elevation, backfilling trenches, raising garden beds, and leveling under non-structural landscape features. For building pads, driveways, and septic backfill, contractors often prefer clean, low-organic fill or a compactible blend with fewer fines to ensure proper compaction and drainage. For structural work, local contractors typically specify engineered fill or base materials rather than raw fill dirt alone.

Local contractors typically compact fill dirt in 6- to 8-inch lifts and aim for 90% to 95% of Standard Proctor density depending on the project and local code. Small jobs use plate compactors and walk-behind rollers, while larger areas use vibratory sheepsfoot or smooth-drum rollers and small ride-on rollers. If a project is under a building or requires an engineer's approval, compaction testing (nuclear gauge or lab) is commonly required.

Yes. County building departments and health departments in West Florida often have rules about acceptable fill under foundations and for septic system backfill; some applications require engineered fill, compaction testing, or specific materials. For septic systems the local health department may require approved backfill material rather than generic fill dirt. Before ordering, check with your county building or environmental health office and share requirements with Hello Gravel so we can match materials to the job.

Fill dirt is usually the least expensive and works for rough grading, but it packs and holds water more than crushed stone and may rut under traffic. Crushed limestone is a common choice for Florida driveways and pads because it compacts well, drains better, and provides a stable base. River rock and sand are poor substitutes for structural bases: river rock does not interlock well for compaction, and sand can shift; for driveways in Wausau, contractors frequently choose crushed aggregate or a stone base over plain fill dirt.

Yes. Screened or blended fill dirt typically costs more than unscreened dirt because of processing and handling. Price differences commonly range from a few dollars to about $10 per ton depending on local availability and how much screening or blending is required. When ordering on Hello Gravel, note 'screened' or request a blended mix in Order Notes so we can find suppliers that offer it and give an accurate price.

Maintenance frequency depends on use and drainage: for low-traffic graded yards or berms, expect minor settling and spot regrading after heavy wet seasons—often every 1 to 3 years. Driveways or frequently used surfaces built with plain fill dirt will need more frequent topping or regrading; using a compacted stone base reduces maintenance. Plan for annual checks after the rainy season and add material where washouts or settling appear.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.