Fill Dirt in Fort Lauderdale, FL

Fill dirt is clean, compactable soil used to raise ground levels, fill low spots, and create engineered pads for landscaping, lawns, or construction. In Fort Lauderdale it is commonly used to build up yards above high water table areas, level sites before sod or pavers, and create foundations for sheds or driveways. Because local soils are sandy and the area has a high water table, contractors often compact fill dirt in lifts and account for drainage when using it here.

In Fort Lauderdale, delivered fill dirt generally ranges from about $12 to $30 per cubic yard depending on cleanliness, source, and delivery distance. Prices vary by supplier and truck size, so we recommend getting a local quote through Hello Gravel for precise pricing and to confirm any minimums or delivery fees.

One cubic yard equals 27 cubic feet and usually weighs about 1.1 to 1.3 tons depending on moisture and soil type. As a rule of thumb, one ton (roughly 0.83 cubic yards) of fill dirt will cover about 270/D square feet where D is depth in inches; for example, at 2 inches depth one ton covers about 135 square feet. Always order 5-10% extra to allow for compaction and settlement.

Fill dirt is usually cheaper per cubic yard than processed gravel because it is less processed and commonly available from excavation. However, final cost comparisons depend on delivery distance, required quantity, and whether you need screened or engineered fill; ask for a detailed quote to compare costs for your specific job.

Fill dirt can be used as structural backfill in many situations, but in Fort Lauderdale you should avoid using high-clay or uncompacted fill directly against structures. For retaining walls and foundations it is common to use clean, free-draining fill or mix layers with engineered material and compact in lifts; check engineer or local code for required backfill specs.

Fill dirt is primarily soil used to raise grades, while gravel is a coarse aggregate used for drainage and structural base. In Fort Lauderdale's sandy, high-water-table conditions, gravel or crushed stone is often preferred for drainage layers and driveway bases, while fill dirt is used to build grade or backfill where drainage is not the primary concern.

You can place fill dirt directly over existing soil for simple grade adjustments, but for stable results you should remove vegetation, loosen or scarify surfaces, and place fill in thin lifts with compaction. In coastal Fort Lauderdale, extra attention to compaction and settlement is important because sandy native soils can shift and settle over time.

Fill dirt alone is not a drainage solution; adding soil will raise grade but may not improve water movement if the soil is fine-textured and compacted. For persistent wet yards in Fort Lauderdale, combine raising grade with proper swales, gravel/drainage layers, and possibly a professional assessment to address the high water table and local standing-water issues.

Hello Gravel commonly uses tri-axle dump trucks that typically carry roughly 10 to 14 cubic yards of loose fill dirt, though actual capacity depends on moisture and material type. You can also order smaller quantities (minimums apply), so request a quote in the checkout to confirm truck size, delivery timing, and any site access considerations.

Small yard-leveling projects often do not require a permit, but larger fills, changes in elevation, or work in floodplain or wetland areas may need permits from the City of Fort Lauderdale or Broward County. Always check with the Fort Lauderdale Building Department or a local engineer before bringing in large volumes or changing site elevations.

Compact fill dirt in thin lifts (typically 4-8 inches) using a mechanical compactor and test with a compaction meter if the project is structural. Because Fort Lauderdale soils are sandy and water tables are high, adequate compaction and moisture control during placement are essential to reduce long-term settlement and maintain grade.

You can request tailgate spreading at checkout, but spreading is performed at the driver's discretion and depends on site conditions and safety considerations. Hello Gravel recommends noting spreading preferences in your order and hiring a local contractor for guaranteed grading and compaction work.

Measure the length, width, and desired depth in feet, multiply to get cubic feet, then divide by 27 to get cubic yards (length x width x depth / 27). For a 20-foot driveway example, multiply by the driveway width and depth you want, then add 5-10% for compaction; if you prefer, use Hello Gravel's material calculator or contact our team for help estimating quantities.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.