Fill Dirt in Chiefland, FL

Prices vary by supplier and season, but expect a rough range of $10 to $35 per ton (about $8 to $30 per cubic yard) for basic fill dirt in the West Florida/Chiefland area. Local geology, delivery distance, and truck access affect cost. For an exact price and delivery fee for your address, check your zip code on Hello Gravel or request a quote.

Hello Gravel connects you to local Levy County and nearby suppliers rather than selling directly, so available vendors vary by zip code. Most local quarries and landscape suppliers in the region work with a minimum around 3 tons or one dump truck load, but minimums can change by supplier and material. Contact our team or check your zip code on the site to see available suppliers, addresses, and exact minimums for your delivery.

To raise 1,000 sq ft by 4 inches you need about 12.3 cubic yards (roughly 15 tons using a common conversion). For 6 inches you need about 18.5 cubic yards (roughly 22 to 23 tons). These ton estimates assume a typical fill dirt density; actual tons can vary, so use cubic yards for ordering and confirm with Hello Gravel if you want a weight estimate.

Remove organic material and vegetation, proof-roll or subgrade the existing surface, and over-excavate soft spots before placing fill. Place fill dirt in thin lifts (typically 4 to 6 inches loose) and compact each lift with a plate compactor or roller until the layer is firm and stable. In areas with a high water table, improve drainage first, consider a coarse base or sand layer, and avoid placing saturated fill until conditions dry.

Small amounts of fill for yard grading or driveway elevation usually do not require a permit, but significant grading, filling of wetlands, altering drainage, or raising large volumes often does. Levy County and state wetland or floodplain rules can apply, so contact Levy County permitting/zoning or the county engineer for confirmation before large jobs. When in doubt, get a quick permit check to avoid fines or rework.

Fill dirt is an inexpensive structural subfill that compacts well and is suitable as a base layer or to raise grade, but it is not an ideal wearing surface for driveways. Crushed stone or crushed shell provide better drainage, load-bearing, and long-term performance for driveway surfaces in coastal Florida. For best results, use fill dirt as a compacted subbase and finish with crushed stone or shell as the wearing layer.

Longevity depends on compaction, drainage, and traffic: a well-compacted fill dirt base with good drainage can perform for many years, but poorly drained or unconsolidated fill will settle and require regrading. In West Florida's heat, humidity, and heavy rains you should expect to check and regrade low spots after big storms and address erosion promptly. For driveways, top with a stable surfacing material to reduce maintenance and prolong performance.

Yes. Deliveries are typically by tri-axle dump truck and require adequate road width, load-bearing capacity, turning radius, and overhead clearance. Narrow roads, weight-restricted bridges, tight gates, or soft shoulders can require a smaller truck or offload location; provide photos of access or contact Hello Gravel ahead of delivery so the carrier can plan. Remember Hello Gravel's minimum order is 3 tons and tailgate spreading is available at the driver's discretion.

A geotextile separator fabric is commonly recommended to keep fill dirt from mixing with soft native soils and to improve performance in wet or coastal sites. Lime or cement stabilization is an engineered solution used for heavily loaded roads or pads and should be specified by an engineer if required; it is usually unnecessary for typical yard grading. For most homeowner projects in Chiefland, proper compaction, drainage, and a geotextile are the practical first steps.

Common issues include organic material pockets, clay or sand lenses, construction debris, shells, and invasive vegetation that can affect compaction and stability. There may also be regulations around filling wetlands or altering drainage, and suppliers should be able to confirm their source and whether material was screened or tested. Ask your Hello Gravel supplier for source details and inspect delivered material promptly; contact customer service if you suspect contamination or nonconforming material.

Hello Gravel lets you choose preferred delivery dates through checkout with standard delivery usually available in 2+ business days and next-day delivery possible for orders placed before noon CST for an extra fee. Drivers may provide tailgate spreading at their discretion; request that service in the Order Notes but note there are no spreading guarantees. For large or complicated sites, contact our team ahead of time so we can coordinate the right truck size and delivery plan.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.