Gravel delivery in McLendon-Chisholm, TX

Delivered gravel prices in the McLendon-Chisholm/Kaufman County area generally range from about $15 to $45 per ton depending on the material (base stone vs decorative) and delivery distance. Remember our minimum order is 3 tons; a typical 2-car driveway often needs 5 to 15 tons, so material-only costs commonly run from roughly $75 to $675 before any installation or spreading fees. Additional charges can apply for next-day delivery, long-haul trips, or requested spreading services.

For clay soils and hot summers around McLendon-Chisholm, crushed limestone or crushed granite (3/4u0022 to 1u0022) are dependable for driveways because they compact well and shed water. Drive stone or crusher run makes a good compacted base, and pea gravel is fine for decorative areas but can migrate and float on clay so it’s less ideal for heavy-traffic driveways. Choose a multi-size base with a compacted surface layer for better long-term performance in local clay conditions.

Use a working conversion of about 1.4 tons per cubic yard (varies by material). A typical 2-car driveway (about 12 ft x 24 ft) at 4 inches depth needs roughly 4 to 6 tons; if you build deeper or larger, plan 8 to 15 tons. A 1,000 sq ft patio at 2 inches of gravel needs about 8 to 10 tons, and a 200 ft long driveway approach 12 ft wide at 3 inches depth will need roughly 25 to 35 tons. These are estimates; use our online calculator or contact us for a site-specific quote.

Hello Gravel connects you with local suppliers in the Kaufman County area who commonly offer base gravel, crusher run, crushed limestone, and decorative gravels. Local delivered price ranges typically fall between $15 and $45 per ton depending on type and quantity; decorative gravels and specialty colors run higher. For exact delivered pricing to your address, enter your zip code on our site or request a quote so we can match you with nearby suppliers and haulers.

Permitting rules vary: McLendon-Chisholm and Kaufman County rarely require a permit for a simple residential gravel driveway, but local building codes, right-of-way rules, or drainage ordinances can apply. If you live in an HOA, check your CC&Rs for restrictions on surface material, color, and curb cuts before you install. We recommend confirming with city/county offices and your HOA before ordering materials to avoid surprises.

In McLendon-Chisholm’s climate you should plan light maintenance annually—raking, filling low spots, and addressing drainage—and a larger refresh (adding 1-3 inches of gravel and regrading) every 2 to 5 years depending on traffic. Yearly basic upkeep costs for most homeowners are often $50 to $300 if you do the work yourself or hire occasional small jobs; periodic regrading and adding material can cost several hundred dollars to $1,000+ when contracted. Good initial base construction lowers long-term maintenance costs.

Gravel is cost-effective, permeable, and easy to repair, making it a practical choice for rural McLendon-Chisholm properties that see trucks and farm equipment. However, gravel can rut and require more frequent upkeep under heavy, concentrated loads, whereas asphalt, concrete, or heavy-duty pavers provide a harder, lower-maintenance surface at a higher upfront cost. For mixed use, a properly built compacted gravel base with thicker sections in wheel paths can provide a good balance of durability and cost.

For typical residential driveways with occasional truck traffic in the McLendon-Chisholm area, we recommend a compacted base of 6 inches of crusher run or compactable base material, with an additional 2 to 3 inches of compacted surface stone. For heavier use (regular farm trucks or equipment), increase the base to 8 inches or more and consider geotextile fabric to separate the clay subgrade from the base. Proper grading, positive drainage, and mechanical compaction (plate compactor or roller) are essential to reduce washouts and ruts.

In the Kaufman County/McLendon-Chisholm area base gravels and crusher run commonly range from about $15 to $30 per ton delivered, while decorative gravels like pea gravel, colored rock, or river stone typically run $30 to $70 per ton delivered. Prices vary by material, color, quarry distance, and seasonal demand, so check a zip-code-specific quote for precise pricing. Remember our minimum order is 3 tons and larger orders usually bring lower per-ton rates.

Yes—local contractors and landscaping crews around McLendon-Chisholm commonly offer turnkey services including grading, base installation, delivery, and compaction. Typical installation pricing varies widely by scope: expect anything from about $2.50 to $6.00 per square foot for a properly graded and compacted gravel driveway, or $30 to $75+ per ton installed when the job includes grading and compaction. Get multiple quotes and ask for references and a clear scope (base depth, compaction standard, drainage work) before hiring.

When ordering, tell us the project type, desired finished depth, anticipated vehicle loads, approximate square footage, and any color preferences or HOA restrictions. Mention local conditions like clay subsoil or known drainage issues so we can match you with an appropriate material (for example, crushed limestone vs decorative pea gravel) and advise on base depth and compaction. Use our material calculator or contact our team with project details for a tailored recommendation and delivery estimate.