Fill Dirt delivery in Cross Roads, TX

Gravel and fill-dirt serve different jobs: fill-dirt is compactable soil used to raise grade and support lawns or foundations, while gravel is best for drainage and hard surfaces. In Cross Roads, where local soils tend toward clay, use fill-dirt to build up low spots and achieve stable grades; use gravel on top only where drainage or a hard surface is needed. For many projects the right approach is a compacted layer of fill-dirt beneath a gravel base.

Yes. For a stable gravel surface you should place and compact fill-dirt first, then add a well-graded base rock and finally the decorative or surface gravel. In North Texas conditions we also recommend a geotextile fabric between soft subsoils and fill to reduce mixing and improve stability.

Fill-dirt is typically cheaper per cubic yard than washed or decorative gravel because it is lower-grade soil material. In the Texas Region you can generally expect fill-dirt to cost substantially less than gravel, but exact prices vary by supplier, delivery distance, and amount — get a Hello Gravel quote for a current price for your zip code. Remember to factor in compaction and any hauling or spreading fees when comparing total project cost.

If you are building a structure or a load-bearing pad, consult a geotechnical engineer or local building department — project-specific compaction percentages and testing may be required. For typical landscaping and non-structural fills in Cross Roads, compacting fill in lifts (commonly 6-8 inches) with equipment until firm is standard practice to reduce future settling. Always follow any local code requirements if your project is permitted.

Use this simple formula: area in square feet times desired depth in inches, divided by 324 equals cubic yards (cubic yards = sq ft * inches / 324). For example, to raise a 1,000 sq ft area by 3 inches you need about 9.3 cubic yards. Order 10-20% extra to allow for compaction and grading loss and use Hello Gravel's calculator or contact our team for help with your measurements.

A common tri-axle dump truck used in our network carries about 10-12 cubic yards of loose fill-dirt; quad-axles and other truck types will vary. Pricing depends on the material, distance, and quantity; for current local rates in Cross Roads, get an instant quote on our site or call our sales team. Hello Gravel has a 3-ton minimum and can show you truck size options at checkout.

You should remove sod and most organic topsoil before placing fill-dirt because vegetation and organic matter decompose and cause settling. Strip or till out the topsoil, then place fill-dirt in compacted lifts to get a stable finished grade suitable for lawns, patios, or structures.

Start by addressing water: correct drainage or standing water before adding material. Remove wet, organic surface soil, then add well-draining, compactable fill-dirt in thin lifts and compact each lift; for high-traffic areas consider a crushed-stone base or geotextile fabric under the fill to improve load-bearing performance in North Texas clay soils. Timing work for drier seasons will reduce problems with compaction and settling.

Hello Gravel delivers fill-dirt to Cross Roads using local supplier and hauler partners. Drivers may be able to tailgate spread at their discretion—request spreading at checkout and the driver will assess safety and access on arrival, but spreading is not guaranteed. For guaranteed spreading or finish grading you should plan to hire a local landscaper or excavator.

Standard delivery lead time is 2+ business days; next-day delivery is available for orders placed before noon CST for an additional fee. Most fill-dirt deliveries in our network use tri-axle dump trucks (about 10-12 cubic yards loose), but larger trucks are available depending on access and local supplier fleets. Check availability for your zip code and preferred date during checkout.