Gravel in Burke County, NC

A 10-yard load in Burke County typically runs in the neighborhood of $500 to $1,000 depending on material type, local supplier rates, and delivery difficulty. Lighter decorative gravels and specialty mixes cost more, while basic crusher-run or bank-run materials are cheaper. Request a zip-code quote through Hello Gravel for an exact price.

Delivered gravel in Burke County commonly ranges from about $35 to $65 per ton; because gravel density varies, that converts to roughly $47 to $104 per cubic yard (using 1 yd3 = 1.35 to 1.6 tons). Exact pricing depends on material type, moisture content, and local haul distance, so get a location-specific quote for accuracy.

A standard tri-axle dump truck carrying 10 to 12 cubic yards typically holds about 13.5 to 19.2 tons of gravel, depending on the material density. Lighter decorative gravels are toward the low end and dense base rock toward the high end.

For a typical residential driveway delivery in Burke County, expect a 10 to 12 cubic yard load to cost roughly $500 to $1,100 delivered, depending on material and access. Difficult access, long drives, steep grades, or required permits can add surcharges, so note those details when you request a quote.

For a 200-foot driveway: at 10-foot width and 3-inch depth you need about 18.5 cubic yards (roughly 25 to 30 tons); at 12-foot width you need about 22.2 cubic yards (roughly 30 to 35 tons). Using local delivered pricing of $35 to $65 per ton, material cost will typically run about $900 to $2,275, before any site prep or spreading fees.

A 20-foot long driveway section at a 10-foot width and 3-inch depth requires about 1.9 cubic yards, roughly 2.5 to 3 tons of gravel. At $35 to $65 per ton you can expect material and delivery of about $90 to $200 for that small area, though minimum order or delivery fees may apply.

The most economical choices in Burke County are usually crusher-run (crush-and-run), bank-run, or recycled crushed concrete for base and resurfacing. Installed cost (material plus delivery) commonly falls in the $25 to $45 per ton range for these materials, with final cost depending on haul distance and any spreading/compaction services.

For driveways in Burke County, coarser stone like 20mm (about 3/4 inch) generally performs better for drainage and for handling vehicle loads; 10mm works well for walkways or decorative top layers. Cost per ton is usually similar between sizes, though decorative or colored 10mm mixes can carry a small premium.

Putting gravel directly over grass is not recommended because vegetation will break down and cause sinking and mixing with soil. Best practice is to remove vegetation, grade and compact the surface, and optionally install geotextile fabric; DIY prep for a typical driveway can cost $100 to $500 in materials and rental tools, while professional excavation and grading can range from $300 to $1,200 or more depending on scale.

Bulk dump-truck delivery is almost always the cheapest per ton in Burke County; pickup loads and bagged gravel cost significantly more per ton due to handling and packaging. Hello Gravel’s minimum order is 3 tons, but many local suppliers can offer smaller loads, bag delivery, or half-truck options—check your zip code and request small-load availability at checkout.

Standard delivery is usually available in 2+ business days, and next-day delivery is offered if ordered before noon CST (a fee may apply). Tailgate spreading can sometimes be performed at the driver’s discretion—request it at checkout but note there are no guarantees and the driver will assess safety and access on arrival.

Materials in Burke County reflect local geology—expect colors from gray to brown and textures typical of Piedmont/foothill aggregates, so appearance will vary by supplier. Natural variation is normal; if color or texture matters, note preferences in Order Notes and request samples or a location-specific description when you get a quote.