Skip to main content

Asphalt Aggregate

Asphalt Aggregate Screenings

Asphalt aggregate screenings are the fine crushed stone sifted out during quarry production. The pieces run from about 3/8 inch down to stone dust. They're angular and well-graded, so the chips and dust pack tightly when you compact them. Most screenings come from the same limestone, granite, or trap rock quarries that supply stone to asphalt plants.

The word asphalt in the name only tells you where these screenings come from. They're the fine cut of rock that gets blended into hot asphalt mix at the plant, and any surplus gets sold on its own. You'll pay less per ton than for clean crushed stone because screenings are a byproduct. Some yards call the same stuff quarry screenings, stone dust, or 1/4-inch minus.

2
named grades in this family

Compare every grade

GradeSizeShapeWashedTop useWe deliver
Screenings (#10, Asphalt, Unwashed, Black)No. 4 downAngularUnwashedAsphalt productionReference only
Screenings (Asphalt)AngularDriveway baseReference only

What people use it for

Paver base leveling course under brick and flagstoneWalkway and path topping that packs into a hard surfaceHorse arena and dog run footingFill under concrete slabs and padsFine cut for blending into hot asphalt mix at the plantFilling low spots and ruts in gravel driveways

How to choose within asphalt aggregate screenings

Match the plant's recipe

Hot-mix and cold-patch plants work to a size spec. Order the size the paver is running, not the size closest to it.

Coarse for base courses, fine for surface

Bigger stone carries load in the binder layer. Smaller stone reads smooth on the surface course.

Cold patch is different

Cold patch is pre-mixed and ready to shovel. Straight asphalt aggregate is just the stone — a plant blends the binder.