Gravel in Fort Pierce South, FL

Delivered prices vary by material, supplier, and distance, but typical ranges for Fort Pierce South are: crushed stone or limestone $30-$50 per ton, pea gravel $40-$70 per ton, and crushed shell $35-$60 per ton. Converting to cubic yards (material dependent) these roughly equal $40-$70/yd3 for crushed stone and $55-$95/yd3 for pea gravel. Prices can be higher for small orders, special colors, or next-day delivery; contact Hello Gravel for a zip-code specific quote.

Hello Gravel connects you to local quarries, landscapers, and haulers that serve Fort Pierce South; specific supplier names depend on your zip code. Typical delivery patterns in the area: minimums of 3 tons (Hello Gravel minimum), free delivery within a short radius on many orders, or delivery fees of about $0-$75 for nearby loads and $75-$150+ for longer hauls or small orders. For exact suppliers, fees, and minimums, check your zip code in our checkout or contact our team.

For coastal Southeast Florida, angular crushed stone (eg, 3/4u0022 crushed stone or limestone) is preferred for driveways because it locks together and resists washout better than round pea gravel. For drainage swales and pervious areas, clean washed stone (#57) or open-graded rock helps infiltration. Crushed shell is commonly used locally for aesthetics but can be prone to breakdown and washout in heavy storms, so pair it with edging and good drainage if used.

Use this Fort Pierce South guide (approximate): 2u0022 depth = about 6.2 yd3 or roughly 8.5–9.0 tons; 4u0022 depth = about 12.3 yd3 or roughly 17–18 tons; 6u0022 depth = about 18.5 yd3 or roughly 25–26 tons. These values assume roughly 1.3–1.4 tons per cubic yard; actual tons vary by material and moisture, so order a little extra (5–10%) to account for compaction and grading.

Possibly. Fort Pierce South is in St. Lucie County and many installations are governed by county building and zoning rules plus any HOA covenants. Before installing, check St. Lucie County permitting requirements and your HOA rules for driveway surface, width, setback, and stormwater standards; contact your HOA and the county Building/Zoning office to confirm.

Typical installed costs in the Fort Pierce area for a basic gravel driveway range about $1.50–$3.50 per sq ft, so a 1,000 sq ft driveway would commonly run $1,500–$3,500. Factors that raise cost include extensive grading, retaining walls or edging, geotextile fabric, heavier base rock, and difficult access; always get local contractor quotes for exact pricing.

Angular crushed stone and crusher-run mixes resist washout best because the particles interlock, while round pea gravel and loose shell are more likely to migrate during heavy rains or hurricane runoff. In Fort Pierce South’s intense rain events, contractors commonly recommend edging (concrete, pavers, or timber), geotextile fabric, and/or stabilization grids to keep material in place and protect edges and slopes.

Yes, some local contractors in the Fort Pierce area offer stabilized or resin-bound gravel systems that lock aggregate in place and reduce dust and migration. Expect resin-bound or polymer-stabilized systems to cost substantially more—commonly $8–$15 per sq ft installed—compared with $1.50–$3.50 per sq ft for conventional gravel installations, but they reduce long-term maintenance and washout risk.

Plan for regular maintenance: regrading or light top-up every 1–3 years, adding 1/2u0022–1u0022 of fresh gravel as needed after storms, annual weed control, and repair of edges after heavy rainfall. Typical small maintenance deliveries (a few tons) run $200–$700 delivered; labor for regrading or compaction varies—budget a few hundred dollars per event or get a contractor estimate for larger jobs.

Yes. St. Lucie County and local municipalities regulate stormwater management and may require that driveway or swale work not increase runoff or block public drainage. Gravel is often more permeable than pavement, but compaction and fines can reduce permeability; check with St. Lucie County Development Services and your local municipality for permit requirements and any stormwater design rules before you install.