Gravel in Riverside, FL

Prices vary by gravel type and supplier, but in the Jacksonville/Riverside area delivered gravel often ranges roughly $25 to $60 per ton depending on material (pea gravel, crushed stone, driveway mix). Per-cubic-yard pricing is sometimes used; 1 cubic yard of gravel usually weighs about 1.3 to 1.5 tons. For an exact, up-to-date price for your zip code, request a quote on Hello Gravel.

Most tri-axle dump trucks used locally carry about 10 to 16 tons of gravel depending on the truck and material density. Delivered truckload price depends on distance, load size, and material type, so costs vary; Hello Gravel shows delivery fees in checkout and can provide per-truck or per-ton quotes. Note Hello Gravel's minimum order is 3 tons, so smaller jobs may be priced per-ton or combined into a larger delivery.

Using a common example (20 ft long by 10 ft wide at 4 inches compacted depth), you need about 2.5 cubic yards or roughly 3.5 tons of gravel. At local delivered prices of about $25 to $60 per ton, material cost would be approximately $90 to $210, before delivery fees and any installation labor. If you plan deeper base or additional layers, expect more material; always round up 10% and get a Hello Gravel quote for exact pricing.

You can order directly through Hello Gravel to connect with local suppliers and haulers serving Riverside. Suppliers in our network often offer volume discounts for larger orders or for regular contractor accounts; contact Hello Gravel sales for bulk pricing and contractor terms. Remember our minimum order is 3 tons and delivery windows and pricing are shown during checkout.

Labor pricing varies: some small crews or independent contractors charge hourly and $50 to $100 per hour is within the local range, while many landscape or driveway crews price per project or per square foot. $100/hour may be common for experienced operators or small specialty crews, but you should get at least two local bids to compare scope, equipment, and guarantees. Hello Gravel can deliver material to a contractor if you already have someone hired.

For Florida's wet, sandy conditions, a compactable, well-graded base mix (crusher-run or 'driveway mix') is a common choice for durability and stability, with a top layer of #57 or 3/4u0022 crushed stone for drainage. Pea gravel is attractive but tends to migrate and may require edging; crushed concrete or limestone can be cost-competitive locally. Prices differ by type: decorative pea gravel and washed stone sit at the higher end, while base mixes and recycled materials are often cheaper—check Hello Gravel for local, type-specific prices.

Regulations vary: the City of Jacksonville and Duval County rules can affect curb cuts, drainage, and driveway construction, and many HOAs have explicit rules about driveway materials and appearance. Before ordering, check your city/county building department and review HOA covenants to confirm any permit, setback, or surfacing rules. If you need help, Hello Gravel's team can point you to local resources but cannot obtain permits for you.

Hello Gravel's minimum order is 3 tons and standard delivery typically takes 2+ business days with optional next-day delivery for orders placed by the stated cutoff (additional fee applies). Tailgate spreading may be available at the driver's discretion if requested at checkout, but spreading or compaction services are not guaranteed and usually incur extra charges if offered. Always review your checkout estimate for delivery fees and note additional labor (spreading/compacting) is commonly arranged with a contractor.

Use volume first: cubic yards = (length ft * width ft * depth ft) / 27. To get tons, multiply cubic yards by an estimated density: most gravels are about 1.3 to 1.5 tons per cubic yard, so use 1.4 as a practical average. Round up about 10% to allow for compaction, slopes, and waste, or use Hello Gravel's material calculator for a guided estimate.

Florida's rainy season (roughly summer months) can slow deliveries and site work, and coastal demand or storm recovery can temporarily tighten supply or raise prices. Construction and landscaping demand in spring and fall also affect availability and lead times, so scheduling ahead reduces risk of delays. Hello Gravel shows delivery windows and can provide seasonal availability guidance for your zip code.

Suppliers quote both ways; contractors often buy by the ton while homeowners see per-cubic-yard pricing—either is fine as long as you convert consistently. Use the conversion range of 1.3 to 1.5 tons per cubic yard to compare quotes and confirm whether delivery and spreading are included. For the most accurate comparison, ask for a delivered price to your Riverside address from Hello Gravel.