Gravel in Pembroke Park, FL

Use Hello Gravel to check your zip code and get matched with local, vetted suppliers and haulers that deliver to Pembroke Park. You can also call our team for help selecting material and scheduling delivery; we coordinate pickup and trucking so you get consolidated pricing and a confirmed delivery window.

Typical bulk gravel prices in South Florida run roughly $35 to $70 per ton depending on material (pea gravel, crushed stone, crushed shell). Delivery fees vary by distance and truck type; many orders include free delivery, but expect $50 to $150 or more for longer hauls or small orders—Hello Gravel minimum order is 3 tons.

City and HOA rules vary, so check Pembroke Park zoning and your HOA covenants before installing gravel in visible front yards or parking areas. If you belong to an association, get written approval first; for city-level questions contact Pembroke Park planning or code enforcement to confirm setback, drainage, or surfacing requirements.

For Pembroke Park’s wet, sandy conditions, angular crushed stone or crushed limestone over a compacted base performs best because it locks together and drains well. Crushed shell is commonly used in South Florida for its local look, but it can break down over time; avoid loose river rock for driveways since it shifts and can float during heavy rain.

Estimates: a single-car driveway (12x20) needs about 3.1 tons at 3u0022 depth or about 4.1 tons at 4u0022 depth. A two-car driveway (20x20) needs about 5.2 tons at 3u0022 or about 6.9 tons at 4u0022. A 10x10 patio needs roughly 0.9 tons at 2u0022 or about 1.3 tons at 3u0022; remember Hello Gravel minimum order is 3 tons, so order accordingly.

Install a vibratory-compacted base of crusher-run or dense-graded aggregate (4u0022-6u0022) over a permeable geotextile fabric, then top with decorative gravel for best stability and drainage. Use solid edge restraints (concrete curb, metal or timber edging) and grade surface with a slight crown to shed water; consider adding swales or catch basins in areas prone to runoff.

Labor and equipment vary by scope, but expect contractor installation rates roughly $2 to $6 per sq ft for a properly prepared gravel driveway, including base prep and compaction. Equipment rental estimates: plate compactor $70-$150/day and skid steer $200-$400/day; always get local itemized quotes since accessibility and site prep can change costs.

In Pembroke Park you can expect periodic top-ups every 1 to 3 years depending on traffic and storm events; heavy-rain seasons or hurricanes can accelerate loss. Routine maintenance like regrading and spot refills is inexpensive for small areas (a few hundred dollars); larger replenishments are charged by the ton plus haul and spreading costs.

Yes—Broward County and local demolition/recycling yards accept construction and demolition material, including crushed concrete and stone, at regional transfer or recycling centers. Check county solid waste resources or ask Hello Gravel for local supplier partners who offer recycling or reclaimed material pickup and disposal options.

Gravel is the lowest upfront cost and is highly permeable, which helps with local drainage, but it requires more maintenance and can wash during storms. Asphalt and pavers are more durable and lower maintenance; asphalt typically costs $3-$7 per sq ft installed and pavers $10-$25 per sq ft, while gravel is commonly $1-$3 per sq ft installed. Check Pembroke Park permitting rules for hard-surface driveway requirements and HOA standards, since some areas require impervious-surface permits or specific materials.

Hello Gravel coordinates delivery through local contracted haulers and offers standard delivery with a 2+ business day lead time; next-day delivery may be available for orders placed before noon CST for an extra fee. Tailgate spreading can sometimes be requested at checkout, but drivers perform spreading only at their discretion and Hello Gravel does not guarantee spreading services.