Gravel in Philadelphia, PA

A common tri-axle dump truck carries about 10 to 12 tons of gravel. Costs in Philadelphia vary by material, season, and delivery distance; a full truck can range widely depending on the stone type and supplier. For an exact price for your address and material choice, enter your zip code on Hello Gravel to get a local quote and delivery estimate.

One ton of gravel is about 0.77 cubic yards, which covers roughly 62 sq ft at a 4-inch depth, 124 sq ft at 2 inches, or about 248 sq ft at 1 inch. These numbers assume typical crushed stone density; actual coverage can change with material type and compaction. Always order an extra 5-10% to allow for compaction and grading.

The most cost-effective options are to order common local mixes and larger quantities to spread delivery costs across more material, or to choose recycled crushed concrete when appropriate. Prices also vary by season and supplier, so compare quotes on Hello Gravel and consider flexible delivery dates to lower cost. Remember lower price may mean different color or more fines, so check material descriptions.

For durability in Philadelphia's freeze-thaw climate, angular crushed stone (for example, crushed stone base material and #57 topcoat) performs well because it compacts and sheds water. A layered approach with a crushed base (4-6 inches) and a smaller topcoat provides the best longevity. Good drainage and periodic maintenance will extend the life of any gravel driveway.

Cost depends on driveway width, depth, material, and delivery. For example, a 20 ft long by 10 ft wide driveway at 4 inches depth needs about 2.5 cubic yards (roughly 3.3 tons); total cost will depend on the per-ton price for your chosen material and delivery fees. Use Hello Gravel's calculator or get a local quote to see precise pricing for your address and material choice.

Two inches is usually not sufficient for a driveway in Philadelphia; it is too thin to resist compaction and rutting, especially with vehicle traffic and freeze-thaw cycles. We recommend a compacted base of 4 to 6 inches using crushed stone, with a 1 to 2 inch topcoat for a finished surface. Proper base preparation and drainage are critical for longevity.

To estimate, multiply length by width and desired depth. For a 40 ft long by 10 ft wide driveway at 4 inches depth you need about 4.9 cubic yards, or roughly 6.5 tons; add 5-10% extra for compaction and grading. Use Hello Gravel's material calculator and input your exact width and depth for a precise recommendation.

With proper base preparation, drainage, and periodic maintenance (topping, grading, and filling ruts), a gravel driveway in Philadelphia can last 10 to 20+ years. Lifespan shortens with poor drainage, heavy vehicle use, or lack of periodic refreshing. Seasonal issues like freeze-thaw and localized flooding can increase maintenance needs in the Philadelphia area.

A typical tri-axle dump truck carrying 10 to 12 tons will cover about 620 to 744 sq ft at a 4-inch depth (using 1 ton = 0.77 cubic yards). Coverage expands at shallower depths: at 2 inches that same truck covers roughly double the area. Confirm truck size with your Hello Gravel quote, since delivered truckloads and capacities can vary by local hauler.

Recycled crushed concrete and reclaimed asphalt (millings) are often cheaper alternatives and perform well for driveways and base layers. Decomposed granite or local bank-run materials can also be less expensive depending on availability. Check Hello Gravel for local supplier options and material descriptions to compare savings and suitability for your project.

Gravel types with fines, such as crusher-run or stone with screenings, compact tightly and form a hard surface when properly installed, but they are not the same as concrete. For a very hard surface you can use crushed stone mixed with a stabilizer (polymer or cement) or compacted crusher-run as a base topped with a smaller aggregate. Consider local moisture and drainage in Philadelphia before choosing a compacted fines mix, since freeze-thaw and poor drainage can cause movement.

You can place gravel directly over dirt for small, low-use areas, but for driveways, walkways, or high-traffic areas you should prepare the subgrade: remove organic material, regrade, compact the soil, and install a geotextile fabric if needed. Add a properly compacted base layer of crushed stone (4-6 inches) and then a topcoat to prevent rutting and mixing with soil. Proper preparation is especially important in Philadelphia where wet soils and freeze-thaw cycles can cause settling.

Locally available materials like bank-run gravel, crusher-run, or recycled crushed concrete often offer the lowest per-ton price in the Philadelphia area because they require less processing. Pricing depends on local supply and demand, so cheaper options can vary by neighborhood and season. Use Hello Gravel to compare nearby supplier prices and material descriptions before ordering.

'Gravel' is a generic term covering many sizes and mixes; base materials labeled 'B' (or B-Bank/B gravel) are typically larger, angular stones with some fines designed to compact well as a subbase. Use 'B' or similar base gravel for structural layers under driveways and pavements, and finish with a smaller topcoat (like #57 or pea gravel) for appearance and drainage. Ask your Hello Gravel supplier which local mix matches the 'B' spec for your project.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.