Gravel in State College, PA

A 10-cubic-yard dump truck of common gravel delivered to State College typically runs about $400 to $900, depending on material type, supplier, and delivery distance. Heavier or specialty gravels and next-day delivery raise the price, while picking up yourself can be cheaper but requires a truck and trailer. Hello Gravel requires a minimum order of 3 tons and will show local supplier pricing and delivery fees at checkout.

Typical delivered prices in the State College area are roughly $40 to $70 per ton and about $35 to $55 per cubic yard for common crushed stone or washed gravel. Prices vary with material type, seasonal demand, and how far a supplier must haul; always check your zip code and supplier notes for exact pricing.

Buying bulk delivered is usually the most convenient and cost-effective for larger projects because per-ton rates drop with volume, but you pay for truck delivery. Pickup can be cheaper if you have a suitable vehicle and time, especially for small loads, but most suppliers in the area have a minimum order and truck requirements. Compare per-ton delivered rates and factor in your time, equipment, and the 3-ton minimum when deciding.

Assuming a 12-foot-wide driveway, a 3-inch top layer requires about 2.2 cubic yards (≈3.1 tons) and a 6-inch base plus top needs about 4.4 cubic yards (≈6.2 tons). Using local delivered prices of $40 to $70 per ton, expect material costs of roughly $125 to $215 for a 3-inch surface, or $250 to $435 for a 6-inch build-up, before any spreading or compaction labor. If you need tailgate spreading, request it at checkout but note drivers perform that at their discretion.

For a 100-foot-long by 12-foot-wide driveway, a 3-inch top layer needs about 11.1 cubic yards (≈15.6 tons) and a 6-inch depth needs about 22.2 cubic yards (≈31.1 tons). At $40 to $70 per ton delivered, material costs would be roughly $625 to $1,090 for a 3-inch surface, or $1,250 to $2,175 for a full 6-inch build, excluding compaction or professional installation. Larger truckloads may lower per-ton delivery cost, so ordering the full quantity at once often saves money.

Two inches is usually too thin for a driveway in State College’s climate and traffic loads; we recommend at least a 3-inch top layer over a compacted base. For long-term performance, most residential driveways do best with a compacted 4 to 6-inch crushed stone base plus a 2 to 3-inch wearing layer, especially in freeze-thaw conditions. Thicker base material increases material cost but reduces rutting and maintenance over time.

One cubic yard of gravel is roughly 1.3 to 1.5 tons; using 1.4 tons/yd3 for estimates, 1 ton equals about 0.71 cubic yards or 19.3 cubic feet. That means 1 ton will cover about 116 sq ft at 2 inches, 77 sq ft at 3 inches, 58 sq ft at 4 inches, and 39 sq ft at 6 inches. Use these figures to quickly estimate quantities for paths, patios, and small driveway patches.

The most affordable options near State College are typically crush-and-run (bank run) and recycled crushed concrete or reclaimed asphalt from local recyclers, because they use locally available material and require less processing. To save on delivery, order in shoulder seasons (late spring or fall) or weekdays when suppliers are less busy, and consider ordering a larger bulk load to reduce the per-ton delivery premium. Always compare local supplier quotes through Hello Gravel and check for seasonal discounts or free-delivery areas.

Cheaper alternatives include crushed recycled concrete, reclaimed asphalt, and compacted stone dust; these materials often cost less per ton than new decorative gravels but may have different drainage, look, and maintenance needs. Installation for reclaimed materials is similar to gravel (grading and compaction) and usually costs less than installing pavers or a resin-bound surface, but reclaimed options can require more frequent topping or maintenance. Choose based on budget, desired appearance, and expected traffic.

Yes — options like compacted crusher fines, polymer-stabilized gravel, and resin-bound aggregates create a firmer, more stable surface that behaves more like pavement. These products and installations are more expensive than loose gravel and often require specialized materials and installers; installed costs commonly run several dollars to over ten dollars per square foot depending on the system and prep work. Hello Gravel can often deliver stabilized aggregates or crusher fines from local suppliers, but installation and any additives (resin or polymer) are usually arranged separately with a contractor.