Gravel in Albrightsville, PA

Delivered gravel prices in Albrightsville vary with material type, truck distance, and supplier. As a rough local range, common driveway gravel or crushed stone often runs between $40 and $75 per ton delivered; a 10-yard (about 15-ton) load typically costs roughly $600 to $1,125. For an exact, up-to-date price for your address and material choice, get a quote through our site since regional sourcing and haul distance change pricing.

Average local per-ton costs depend on type: washed decorative gravel tends to be at the higher end, crushed stone and driveway mix are mid-range, and simple pit-run gravel is lower. In West Pennsylvania, expect a ballpark of about $40-$60 per ton for driveway/crushed stone and $30-$50 per ton for more basic mixes, subject to supplier and delivery distance.

Rural Albrightsville deliveries can increase price because of longer haul times, narrow or steep roads, and required smaller trucks. Hello Gravel’s minimum order is 3 tons, but most local dump trucks are 10–12 cubic yards, so you may pay full-truck delivery even for small orders. Ask about access, gate/road restrictions, and any offloading or long-drive fees when you request a quote to understand the final cost.

One cubic yard is 27 cubic feet. A 10-yard load (270 cubic feet) covers about 1,080 sq ft at 3 inches depth, about 1,620 sq ft at 2 inches, and about 810 sq ft at 4 inches. A 12-yard load increases those areas by 20 percent (for example, about 1,296 sq ft at 3 inches). Use these numbers to plan coverage for your driveway or path.

Generally no. In Albrightsville’s seasonal freeze-thaw and varied soils, 2 inches is usually too shallow for a driveway surface and will settle and rut. We recommend a compacted base of 4–6 inches (or thicker for heavier vehicles) of proper base material (crusher run or compactible stone) with a 1–2 inch wearing layer of clean gravel on top for stability and drainage.

A 20 ft by 100 ft driveway is 2,000 sq ft. For a 4-inch depth (0.333 ft) you need about 24.7 cubic yards (about 25 yd3), which is roughly 35–40 tons depending on material density. For a 6-inch depth (0.5 ft) you need about 37 cubic yards, roughly 50–60 tons. Ask your Hello Gravel quote for exact tonnage based on the specific gravel type we will deliver.

You can, but it is not recommended. Leaving grass in place leads to poor drainage, settling, and weed growth. Best practice in Albrightsville is to remove sod, grade and compact the subgrade, install a geotextile fabric if needed for separation, and place a compactible base before spreading top gravel for long-term performance.

Lower-cost options commonly available in the region include recycled asphalt, crusher run, and pit-run stone. Recycled asphalt and crusher run are often 10–30% cheaper than new washed decorative gravel and perform well as a base or budget driveway surface. Availability and exact savings depend on local suppliers, so compare quotes on Hello Gravel to see which option fits your budget and project needs.

Typical local dump trucks are 10–12 cubic yards, which converts to roughly 13–20 tons depending on the material. Delivered cost for a full truck to a rural Albrightsville address commonly falls between $600 and $1,300, factoring material price and haul distance; however, exact costs vary, so request a quote for your address and material choice to get a precise number.

Many local suppliers offer volume discounts or lower per-ton pricing for large orders; common thresholds are discounts once you exceed a full truckload (around 25–40 cubic yards) or when ordering multiple truckloads. Hello Gravel’s minimum order is 3 tons, but truck size and routing mean suppliers may require full-truck pricing for remote deliveries; ask about bulk pricing and repeat-customer terms when you request a quote.

Provide your delivery address, desired material type (for example, crushed stone or driveway gravel), approximate area or cubic yards needed, access notes (narrow roads, steep drive, low overhangs), and preferred delivery date. Including photos or clear directions helps suppliers estimate truck size and potential access charges so you get an accurate, timely quote.