Gravel in Ridgefield, WA

In Ridgefield, bulk gravel typically runs in a range depending on type: base or crushed rock often costs less than decorative gravels. Expect a price range rather than a fixed number and check with Hello Gravel for an exact quote for your zip code; we also note a 3-ton minimum order applies in many areas and delivery fees vary by supplier and distance.

Tonnage depends on how deep you build the base and surface. For a simple 3-inch surface, a 20x20 driveway needs roughly 4-6 tons and a 30x20 needs about 6-9 tons; if you install a 6-inch compacted base plus 2-3 inches of surface (recommended in wet West Washington), plan on about 12-16 tons for 20x20 and 18-24 tons for 30x20. Use our material calculator or request a quote for a precise estimate based on your planned depths.

Angular crushed rock (3/4" minus or 3/4" crushed) and crushed basalt are good choices because they lock together for stability and shed water when graded properly. Use a coarser crushed base (6" of 3/4" minus) with a 2-3" wearing course of 3/8" to 1/2" crushed rock; avoid smooth river rock or pea gravel as primary driveway surfaces since they move and rut in heavy rain. Add geotextile fabric and perimeter edging to improve drainage and reduce migration into adjacent soils.

Ridgefield’s wet winters increase the risk of rutting, potholes, and washouts if drainage and base aren't properly installed. Freeze-thaw can worsen drainage problems and create frost heaves in poorly compacted sections, so thicker, well-draining bases and annual maintenance (grading and adding fresh material) are important for longevity. Plan work for drier months and invest in good base preparation to reduce winter damage.

Yes, local suppliers and quarries serving Ridgefield typically deliver bulk gravel by dump truck; availability of particular rock types varies with local geology. Many suppliers only deliver material, while installation is usually performed by local contractors; Hello Gravel can connect you to delivering suppliers and often to local installers or recommend contractors who handle excavation, base prep, and compaction.

Installed gravel driveway costs vary by scope, but a full install with excavation, geotextile, base stone, edging, and compaction commonly falls into a broad range. For budgeting, expect variation based on site access and prep needs; contact Hello Gravel for local installed estimates and contractor referrals to get a site-specific price.

Permit and HOA rules can vary by neighborhood; some city or county regulations address stormwater and impervious surfaces while HOAs may restrict gravel finishes or colors. Before you install, check Ridgefield city planning or county permitting and your HOA guidelines, and mention permit needs when requesting quotes so contractors include any required approvals.

Gravel is lower cost up front, drains well, and is easy to repair, but requires routine maintenance and can track soil or migrate without edging. Asphalt gives a smoother, lower-maintenance surface but reduces permeability and may need more costly repairs later; permeable pavers provide excellent stormwater control and a neat look but have higher installation costs. Choose based on budget, desired look, drainage needs, and long-term maintenance willingness.

For Ridgefield’s wet soils, a typical recommendation is 6" of compacted crushed base (3/4" minus) topped with 2-3" of wearing course (3/8" to 1/2" crushed). Spread materials in thin lifts and compact each layer with a roller or heavy plate compactor; include geotextile fabric beneath the base if soils are soft or clayey to reduce settling and mixing. Proper edge restraints and slope grading also help maintain compaction and prevent lateral migration.

Recycled crushed concrete or asphalt is often available in the Clark County and West Washington area and is usually less expensive than virgin aggregate. Recycled material works well for base layers and driveways where appearance is less critical, but it can vary in size, color, and drainage performance and may contain fines that affect permeability. Ask suppliers about the source and gradation, and consider virgin crushed rock for top courses or when consistent appearance and drainage are priorities.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.