Fill Dirt in Cornelius, OR

Delivered fill-dirt prices in Cornelius can vary with supplier, haul distance, and moisture, but expect a rough range of $15 to $45 per ton for typical screened fill. A handy conversion is 1 cubic yard of loose fill-dirt ≈ 1.2 to 1.5 tons, so that works out to about $18 to $68 per cubic yard delivered in many cases. Final cost depends on delivery access, minimum order size, and whether the material is screened or has extra processing.

Hello Gravel connects you to local landscape yards, construction aggregate yards, and farm-quarry suppliers serving Cornelius and West Oregon. Minimums vary by supplier and truck type, but our platform minimum is 3 tons; some suppliers or full-truck deliveries may require 10 to 15 tons for long hauls. If you need less than a full truck, we can often find a supplier willing to deliver a small load or combine orders.

Use fill-dirt as a subgrade compacted in thin lifts: place 6 to 8 inches at a time and compact each lift thoroughly before adding more. Aim for a high level of compaction (commonly 90 to 95 percent of the standard compaction test used by contractors) and then add a 4 to 6 inch crushed-rock base on top for the actual driveway surface. Proper compaction and a rock base are especially important in West Oregon to reduce settlement and water problems.

Cornelius’s wet winters and clay-rich soils hold water and slow drying, which increases settlement risk if fill-dirt is not well drained and compacted. For foundation and grading work, prefer well-draining or engineered fill, add drainage features (like swales or French drains), and avoid placing organic-rich fill in load-bearing areas. When in doubt on structural work, get a geotechnical recommendation to reduce frost heave and long-term settlement risks.

Washed fill has many fines removed and drains better, screened fill has rocks and large debris taken out but may still contain fines, and unwashed fill is raw and may include roots, clay, and organics. For Cornelius grading and under-building use, screened fill with low organic content is usually best; use washed or gravel materials where you need good drainage. Avoid unwashed or high-organic dirt in areas that must stay stable or shed water.

If properly placed, compacted, and covered with a rock base, the fill-dirt subgrade can perform for many years, but the surface layers are what need regular attention. In Cornelius’s wet climate expect to regrade or add fresh top rock every 1 to 5 years depending on traffic, and check for low spots or drainage issues after winter. Promptly repairing ruts and restoring slope to shed water will extend the life of your driveway system.

Calculate cubic yards with: cubic yards = (square feet of area × depth in inches) / 324, since 1 cubic yard = 27 cubic feet. Convert to tons by multiplying cubic yards by about 1.2 to 1.5 (we use 1.3 as a convenient average), for example a 1,000 sq ft area at 6 inches deep needs roughly 18.5 cubic yards, which is about 24 tons. Always round up slightly to allow for compaction and waste, or use our online calculator for a quick estimate.

Local rules vary, so contact the City of Cornelius Building/Planning Department or Washington County before bringing in large quantities of fill. Many jurisdictions require permits or inspections for significant grading, cut-and-fill, or any work that alters drainage or exceeds a certain volume (for example larger jobs often trigger review). It’s best to check early—permit needs, erosion control, and protected-area rules can affect your schedule and material choices.

Fill-dirt is fine for non-structal grading and raising low spots, but on slopes where drainage and stability matter, crushed rock or engineered fill is often better because it sheds water and compacts predictably. Engineered fill or a geotechnical-specified mix is recommended for structural pads, retaining walls, or significant slope rework; crushed rock is a good choice for drainage layers and stable driveway bases. For steep or complex slopes get a geotech or civil contractor to avoid long-term settlement and erosion problems.

Yes, many West Oregon suppliers and landscape yards can supply screened, low-organic fill-dirt suitable for grading and under-structures; Hello Gravel can help source those options in Cornelius. Delivery with tailgate spreading may be offered at the driver’s discretion and requested at checkout, but compaction is usually a separate service performed by a contractor with compaction equipment. If you need compaction, we can help connect you with local crews or recommend asking for contractor referrals when you place your order.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.