Fill Dirt in Gotebo, OK

Hello Gravel has a minimum order of 3 tons (about 2.5 cubic yards for typical fill-dirt). In rural West Oklahoma like Gotebo you may see delivery fees or free delivery depending on supplier distance; expect delivery charges to range from modest to a couple hundred dollars on very remote sites. You can request next-day delivery if you order before noon CST and add delivery notes for placement or access details.

Local fill-dirt pricing in West Oklahoma commonly falls in a broad range because material quality and hauling distance vary; typical market ranges are roughly $10 to $40 per cubic yard or about $8 to $30 per ton. Rural pickup points at or near Gotebo tend toward the higher end once trucking is included, so check the delivered price during checkout. Hello Gravel shows transparent pricing up front so you can compare delivered cost before you buy.

Much of West Oklahoma has clay-rich soils that drain slowly and can hold moisture, so placing non-compacted or wet fill-dirt can lead to long-term settling. For projects in Gotebo, plan for proper compaction, drainage (swales or pipe), and using a drier, well-graded fill if you need structural support. If you are unsure, have a local contractor or soils test confirm compaction requirements before building on the fill.

Yes—many local suppliers provide screened fill-dirt, structural fill, or blended mixes (topsoil removed) tailored for backfill or grade work. Ask for basic specs such as whether the material is screened, maximum rock size, organic-matter content, and whether it contains topsoil or trash; you can also request a sieve analysis for engineered projects. Add any preference (screened, low-organics, or mixed) in the Order Notes on checkout so suppliers can match your need.

Gotebo experiences occasional freeze-thaw swings and seasonal heavy rains that can accelerate settling and surface erosion if fill-dirt is not compacted and protected. To preserve long-term performance, compact fills in lifts, provide positive drainage away from structures, and use erosion control on exposed slopes after placement. Regular inspection after big storms and regrading low spots will help limit future settling.

For small residential jobs, compact fill-dirt in 4 to 8 inch loose lifts using a plate compactor or jumping jack; larger contractor jobs often use vibratory rollers and place 6 to 8 inch lifts. For structural backfill and driveways where bearing matters, aim for mechanical compaction to meet local compaction specs and consider a granular base under drive surfaces. When in doubt on structural or engineered work, get a local engineer-recommended compaction target and test results (compaction report).

Gotebo is a small community, so there may be a limited number of contractors in town; Hello Gravel connects you with local suppliers and contracted haulers and can often recommend experienced operators in nearby towns or countywide. If you need placement, spreading, or compaction, ask during checkout and we can pass along notes to the hauler or suggest contractors in Kiowa County or adjacent communities. Always confirm contractor licensing and references for structural or septic work.

Common erosion-control approaches for Gotebo slopes include seeding with native grass mixes, applying straw or compost mulch, using tackifiers or hydroseeding, and installing erosion-control blankets or wattles on steeper grades. For long-term stability, cap fill-dirt with a layer of topsoil or a gravel surface where appropriate and slope grade to direct runoff to stable outlets. Ask suppliers about blended mixes or adding compost or topsoil if you plan to seed immediately after placement.

Fill-dirt density varies, but a practical rule is 1 cubic yard of typical fill-dirt weighs about 1.0 to 1.3 tons; use 1.15 tons per cubic yard as a mid-range estimate for planning. For example, a 10 cubic yard pad will often weigh around 11 to 12 tons, so order at least that much plus an allowance for compaction and settlement. If you need an exact figure for engineering or pricing, request the supplier’s delivered density or ask Hello Gravel to help estimate based on local material.

As of today, we require 2 business days for delivery.

Use our material calculator here: https://hellogravel.com/calculator/ to enter the length, width and depth measurements of your project. It will automatically calculate the cubic yards/tons needed. If you are unsure how much to order, contact our team for guidance.

Please type in your zip code on any product screen and it will let you know if we service your area. The chances are that we do!

The material will be delivered via dump truck. If your order is under 20 tons, then it will likely be just one dump truck load. If your order is more than 20 tons, it will be more than one dump truck load.

Absolutely! Try our aggregate quiz here: https://hellogravel.com/aggregate-quiz/ Alternatively,you can call us, chat with us (box in the bottom right corner of the website), or email us!

We cannot get out of the truck and manually spread it. However, depending on the location, safety, and comfortability of the driver – we may be able to tailgate spread your material. This involves pulling the truck forward as material is being dumped to make it easier for you to distribute material after delivery.

The minimum order size is 3 tons.

Hassle Free! Our goal is to make the buying process for gravel and other aggregates as easy and seamless as possible. Enter your zip code on our site, select how much material you need (see below FAQ’s to determine order size), select the date and time frame you would like your material delivered at Checkout, and place your order with any major credit card. After the order is placed our in-house support team will contact you to confirm the details. We will send additional confirmations on the day before and the day of delivery. On delivery day, a dump truck will arrive to dump the materials at your specified location. We request that you have someone available to accept the delivery so that we can make sure to dump it in the correct location. That’s it!

No, because we are a national supplier, we utilize our existing network of suppliers across the country. Therefore, the materials will likely be delivered from a contracted trucking company.

We specialize in making the aggregate buying process as easy and seamless as possible by managing the process from end to end. We have a network of suppliers that we source the materials from where we have negotiated rates. However, we do charge a markup and because of this you may be able to find the materials cheaper on your own. But if you want a hassle free experience, then we are for you!

Please fill out the Quote Request form and we will work up a quote for you! https://hellogravel.com/quote-form/

Although uncommon, due to regional sourcing, the type and color of our materials may vary somewhat from the images on our website, reflecting the unique geological offerings of your area. Please communicate any specifications you desire to our team so we can consider them during the sourcing process.

Please contact our customer service team promptly if you experience any delivery or product quality issues. We will work to resolve them satisfactorily.

We are headquartered in New Orleans, LA. However, we have a network of suppliers across the country from which we provide the materials.